This guide covers the PC full release 1.2 series, standard costs, 100% clock speed, and the standard Iron Ingot recipe. It does not use mods or alternate recipes.

Progress through HUB Upgrade 5

A Smelter is available at HUB Upgrade 2, but Miner Mk.1, which sends ore onto a belt, requires Upgrade 5. It is different from the handheld Portable Miner in both crafting and how it outputs ore.

Equipment neededUnlock stage
Smelter and Power LineHUB Upgrade 2
Power Pole Mk.1HUB Upgrade 3
Conveyor Belt Mk.1HUB Upgrade 4
Miner Mk.1 and Storage ContainerHUB Upgrade 5

If Miner Mk.1 is not listed yet, use the HUB terminal to complete the next upgrade deliveries. Trying to attach a belt to a Portable Miner will not solve this.

To build one Mk.1, bring 1 Portable Miner, 10 Iron Plates, and 10 Concrete. You can craft the Portable Miner at an Equipment Workshop.

Connect an Iron node to a Container

The first goal is to mine Iron Ore automatically, smelt it into Ingots, and store them. Get this short line working before connecting Constructors for Iron Plates or Screws.

  1. Place Miner Mk.1 on an Iron Resource Node from the build menu.
  2. Build one Smelter near the Miner.
  3. Place a Storage Container after the Smelter.
  4. Connect a belt from the Miner output to the Smelter input.
  5. Connect a belt from the Smelter output to the Container input.
  6. Run power lines from a Power Pole connected to a generator to both the Miner and Smelter.
  7. Open the Smelter and set its recipe to “Iron Ingot.”
  8. Open the Container and check whether its Ingot stock is increasing.

Building a Smelter costs 5 Iron Rods and 8 Wire. You also need materials for the Container, Power Pole, power lines, and belts. Belt and wire quantities depend on distance, so use the build preview to check what you need.

If you connect the wrong side of the Smelter as the input or output, it will not accept ore. Check both that the belts connect to the machine ports and that items flow in the correct direction. Merely extending a belt close to a port does not connect it.

With one of each machine, 30 Iron Ingots per minute is a guide

With the standard Iron Ingot recipe, one Smelter uses 30 Iron Ore per minute and produces 30 Iron Ingots per minute. This applies when input, power, and output are available and the machine runs at 100%.

Miner Mk.1 output depends on node purity: 30 per minute from an impure node, 60 from a normal node, and 120 from a pure node. A Mk.1 belt, however, transports at most 60 per minute.

One of each machine at the startWhat happens
Impure Iron node30 mined per minute matches the Smelter’s 30-per-minute use
Normal Iron nodeOne Smelter does not consume all the ore
Pure Iron nodeThe belt and Smelter reach their limits before the Miner does

If ore accumulates in the Miner and it stops from time to time, but the Container’s Ingot stock is increasing, the Smelter may be the limiting factor. Check downstream throughput before adding more Miners.

If you want to use all 60 per minute from a normal node, unlock Splitters in Tier 1 Logistics and consider feeding 30 per minute to each of two Smelters. Confirm that the first machine works before expanding; this makes it easier to trace overlooked power or recipe settings.

Separate power, input, and output problems

Miner Mk.1 uses 5 MW and a Smelter uses 4 MW, so these two machines together need 9 MW under standard conditions. Include the load of other equipment connected to the same grid.

Where it stopsWhat to check
No ore accumulates in the MinerIs Mk.1 on a node, and is its power line connected?
Ore is in the Miner but not in the SmelterBelt ports, direction, and any gaps in the belt
The Smelter has ore but does not make IngotsIron Ingot recipe, power, and standby status
Ingots build up in the Smelter and it stopsOutput belt and available Container space
The whole line stops at onceRemaining fuel, Circuit Breaker, and power-grid capacity

Production stopping because the Container is full means the storage output has been used up. Collect the Ingots or send them to the next machine to make room.

If power does not come back, see restoring fuel, capacity, and the Circuit Breaker. Once you have surplus materials, consider the AWESOME Sink and Coupons after setting aside anything needed for deliveries.

Before adding more production machines, if you have reached Tier 3, see starting one Coal Generator and the power available to your factory. Compare generation after subtracting the power used by mining and water extraction.

Once you have a steady supply of Ingots, continue to making Reinforced Iron Plates with an Assembler. Iron Plates and Screws are processed and delivered separately; meet the required amount for both.

To transport ore or products between different heights, see connecting and orienting a Conveyor Lift. First check that items travel through a short route from input to output.

If machine heights and orientations make expansion difficult, see unlocking Foundations, connecting to edges, and expanding with Zoop. Organizing a small work area can help preserve space for transport routes.

Sources and references

Questions and contributions

Share questions, corrections or play reports. Only approved posts for this article and language appear here.

Submit for review

Do not include personal details, passwords or private information about others. Text only. Publication and replies are not guaranteed.