This guide covers PC 2.0.77 base game, normal quality, with no Space Age or mods. It cross-checks the official Wiki and fixed-version developer data. Quality multipliers, modded recipes, and in-game production-speed measurements are outside scope.
Unlock Automation 2 and gather the replacement materials
Research Automation 2 to unlock Assembling machine 2. Its prerequisites are Automation, Steel processing, and Logistic science pack. The research cost is 40 Red Science and 40 Green Science, with 15 seconds per unit. This is separate from actual completion time, which depends on the number and speed of your labs.
| Materials for Assembling machine 2 | For 1 machine | For 4 machines |
|---|---|---|
| Assembling machine 1 | 1 | 4 |
| Steel | 2 | 8 |
| Electronic circuit | 3 | 12 |
| Iron gear wheel | 5 | 20 |
The four-machine example multiplies the materials for one machine by four. It does not include raw materials for making the Assembling machine 1, research costs, or power-distribution equipment. An existing Assembling machine 1 can be used as an ingredient, but count it separately from the Assembling machine 2 you prepare for the swap.
The suggestion is to upgrade one machine that is already running steadily with a complete input supply. Upgrading a machine that is waiting for ingredients or blocked by output does not guarantee that the entire line will become 1.5 times faster.
Compare speed, power, and recipes
| Base performance / normal quality | Assembling machine 1 | Assembling machine 2 |
|---|---|---|
| Footprint | 3×3 | 3×3 |
| Crafting speed | 0.5 | 0.75 |
| Basic active power consumption | 75 kW | 150 kW |
| Idle power consumption | 2.5 kW | 5 kW |
| Module slots | None | 2 |
| Fluid recipes | Not supported | Supported |
The crafting-speed comparison is 0.75 ÷ 0.5 = 1.5. This compares machine capacity when the same recipe runs continuously with sufficient input, output, and power, and without module modifiers. It does not mean belts or inserters move items 1.5 times faster.
Distinguish active consumption from idle consumption too. Adding Assembling machine 2s without modules increases basic active power use; check power generation and supply at your poles.
Replace one existing Assembling machine 1
- Choose one machine to upgrade. Start with an existing, running line that uses only solid ingredients.
- Prepare an Assembling machine 2. Check Automation 2 and its materials, then craft one.
- Replace it in the same spot. Hold the Assembling machine 2 and place it over the existing Assembling machine 1.
- Check the recipe. In the replacement machine’s interface, review the intended recipe, ingredients, and output.
- Check input, output, and power. Confirm inserters can reach the necessary sides and remove finished items.
- Read the reason if it stops. Separate missing ingredients, insufficient power, and blocked output, then compare with the previous setup.
Both machines have a 3×3 footprint, but that does not mean the surrounding supply will keep up. If you are upgrading a Green Science supply line, also check the earlier belt and inserter production feeding it.
For a larger replacement, check the target, replacement item, and construction robots for the Upgrade Planner. Do not assume that marking an upgrade replaces the physical machines by itself.
Connect pipes after selecting a fluid recipe
Assembling machine 2 supports recipes that use fluids. You must also research the recipe for the item you want to make; unlocking the machine alone is not enough. The fluid connection port becomes active when you select a recipe that requires or outputs fluid. Placing a pipe nearby while a solid-only recipe is selected does not make the machine use fluid.
For example, a Processing unit recipe uses Sulfuric acid, so select that recipe, check the direction of its connection port, and connect an acid pipe. Press R by default to rotate the machine, but check the pipes and inserter positions again afterward. Do not connect water or a different oil in its place.
Even though the machine has two module slots, that does not mean every module can be used in every recipe. First check that the machine works without modules; then see increasing Processing unit output with one Beacon for the combination of Productivity and Speed!
| Problem | What to check |
|---|---|
| Cannot craft the machine | Automation 2 research; Assembling machine 1, Steel, Electronic circuits, and Iron gear wheels |
| Production did not increase after the swap | Missing inputs, blocked output, and power supply |
| Fluid does not enter | Selected recipe, connection port, pipe direction, and fluid type |
| Cannot insert a module | Free slots and whether that recipe supports the module |
| Line slows after adding machines | Power-grid capacity, supply belts, and inserters |
Sources and references
Questions and contributions
Share questions, corrections or play reports. Only approved posts for this article and language appear here.
Submit for review
Do not include personal details, passwords or private information about others. Text only. Publication and replies are not guaranteed.