To view a distant mining outpost on the map, connect a radar to your power network. Continuously displaying the nearby area and exploring farther areas one at a time are separate functions. Watch both changes with your first radar.

This guide covers the base game on PC version 2.0.77, with normal quality and no mods. Materials, research, power use, and coverage are checked against version-pinned developer data; map behavior is referenced against the official wiki. In-game placement and scan speeds have not been tested. Later versions' Universe mode and Space Age interplanetary communications are outside scope.

Research and materials for one radar

After unlocking Automation science packs, research “Radar.” The standard cost is 20 red science packs at 10 seconds per unit. Actual completion time varies with lab capacity and power.

ItemAmount for 1Use
Electronic circuits5Crafting the radar
Iron gear wheels5Crafting the radar
Iron plates10Crafting the radar
Power polesAs needed for placementConnect to the power network
Power300 kWRadar consumption, separate from the rest of the factory

Even if the radar is connected to a power pole, it will not operate sufficiently if generation is inadequate. First check water, fuel, and the power network in Steam Power Troubleshooting Steps.

Separate nearby visibility from distant scanning

A radar continuously displays the 7×7 chunks around the chunk where it is placed. Its distant exploration range is 29×29 chunks, but that does not mean the entire area is always displayed in detail.

Map areaFunctionDo not misread it as
Nearby 7×7 chunksRepeatedly updates the areaThe center is the chunk containing the radar
Distant 29×29 chunksExplores faraway chunks in sequenceMonitoring the entire area at once
Explored area that remains darkThe last-known stateA guarantee that enemies or resources are unchanged now

Distinguish “explored” from “currently visible.” If an enemy nest you saw before has changed, the map may not reflect it until the area is checked again. Do not assume a dark map marks a safe route; check conditions in person when you travel.

Connect and check your first radar

These steps are for checking a setup, not an optimal layout for exploring the whole map as quickly as possible.

  1. Finish the radar research, gather its ingredients, and craft one radar.
  2. Choose a location near the outpost you want to check that can connect to the existing power network.
  3. Before placing it, view the minimap coverage indicator and check whether the buildings you want to see are within nearby range.
  4. Place the radar and connect it to a power pole. Check the radar's power status and the supply on the network.
  5. Open the map and check nearby detailed visibility and distant exploration progress separately. If the target building is out of range, reconsider the location.

Checking the power connection of one radar before adding more helps distinguish a location issue from a lack of power. Multiple radars also increase power consumption, so first decide which areas you need to see.

If the map is dark or exploration is slow

Low power slows updates and exploration. A dark distant area may also show the last state that was explored, so do not assume darkness alone means a fault. Check, in order: whether the radar has power, whether the target is within nearby range, and whether distant scanning is still in progress.

To extend power and transport to a distant mine, continue to Your First Shuttle Train. If a solar-only setup stops at night, check day-and-night power with Adding Accumulators. This guide does not provide a fixed time to explore the whole map, guarantee that enemies will not attack, or explain remote operation and circuit-network communication.

Sources and references

Questions and contributions

Share questions, corrections or play reports. Only approved posts for this article and language appear here.

Submit for review

Do not include personal details, passwords or private information about others. Text only. Publication and replies are not guaranteed.