The offshore pump draws the first water from a shoreline. It has a different role from a pump (Pump) that moves fluid along a pipe. Place it by the shore, connect a short pipe from its land-side outlet, and check that water appears.
This guide covers the base game on PC version 2.0.77, on Nauvis, at normal quality, without Space Age or mods. Materials and unlock conditions are checked against version-pinned developer data; placement is checked against the official wiki, which is community-edited. In-game placement and measured output have not been tested. Version 2.1 additions and fluids on other planets are outside scope.
Materials and unlock condition for one pump
Steam power unlocks when you craft 50 iron plates. That is a crafting trigger, not a cost to put 50 iron plates into the research screen. If you use non-standard starting settings, check the current research screen.
| Item or condition | Quantity or requirement | Use |
|---|---|---|
| Iron gears | 2 | Direct ingredients for 1 pump |
| Pipes | 3 | Direct ingredients for 1 pump |
| If crafting from iron plates | 7 plates total for the pump itself | 4 for 2 gears and 3 for 3 pipes |
| Pipes to connect after placement | Additional, depending on distance from the shore to the equipment | Separate from the 3 used to craft the pump |
| Unlock condition | Steam power | Also unlocks pipes, boilers, and related items |
The 7 iron plates are the pump's own material cost, calculated without productivity bonuses. They are not the total for boilers, steam engines, power poles, and connecting pipes. If you are setting up a working power plant, also use Steam Power Troubleshooting Steps.
Place it on shore and check the water outlet
This example uses a short connection on a shore near the factory. It is not a guide to designing the largest power plant or an optimal pipe network.
- Check that Steam power is unlocked, then craft one offshore pump from 2 gears and 3 pipes.
- Go to the water and, while holding the pump, position it on a land tile along the shore. Do not try ordinary placement inland where it cannot touch water.
- Rotate it to a valid placement direction, place it, and locate the fluid connection on the land side.
- Use separately prepared pipes to make a short connection from that outlet. Keep it separate from existing oil or steam pipes.
- Open the connected pipe and check that the fluid is water. Once water arrives, extend the pipe to a boiler or other water input.
The offshore pump itself needs no electricity or fuel. If you place a separate pump along the pipe, check that pump's power, direction, and circuit conditions independently. Before adding a power pole just for the offshore pump, check the name of the equipment you are using.
If it cannot be placed or water does not arrive
| What you see | Check first | Next step |
|---|---|---|
| Missing from the crafting menu | Steam power | Check the iron-plate crafting trigger and research state |
| Cannot place it at the shore | Position relative to water and direction | Move it to a valid land-side position |
| No water in the first pipe | The pump's land-side outlet | Check for a pipe position that connects directly |
| Water is present but the boiler stops | The equipment's water input and fuel | Distinguish the steam output from the water input |
| Flow stops along a pipe | Another pump or a pipe warning | Check power, arrow direction, circuit conditions, and distance limits |
Pipes connect at adjacent openings. Being visually close on screen does not prove that two parts form the same pipe network. Do not attribute problems with steam or power downstream of a boiler to one offshore pump.
If pipes contain different fluids, first separate the connections and then check what each line contains. Removing fluid through the GUI deletes it permanently; do not use that as the first action when investigating a connection. For long-distance designs with an overextended pipe warning, continue to Check Pipes from Crude Oil to Blue Science.
Water sources and the next equipment
This offshore pump does not drain or exhaust the water at its source, and the amount pumped does not change just because the water body is larger or smaller. If the outlet side is full, check whether anything downstream is consuming water. The next question is whether the displayed amount is not increasing or whether there is no supply source.
To learn about storing water, see Connecting a Storage Tank; to start generating power, continue to Steam Power.
Sources and references
Questions and contributions
Share questions, corrections or play reports. Only approved posts for this article and language appear here.
Submit for review
Do not include personal details, passwords or private information about others. Text only. Publication and replies are not guaranteed.