When a lamp does not light after placement, check power and day/night conditions before crafting more materials. Start with one lamp and confirm basic path lighting!
Check the lamp research and materials for one
The current Factorio Wiki lists the technology that unlocks the lamp as “Lamp.” Complete the corresponding research in the technology screen and check that the recipe is available. Do not carry old technology names or ingredient lists from older references into the current requirements.
| Materials for 1 lamp | Quantity |
|---|---|
| Copper Cable | 3 |
| Electronic Circuit | 1 |
| Iron Plate | 1 |
For example, four lamps along a path take 12 Copper Cables, 4 Electronic Circuits, and 4 Iron Plates. This is the total for the finished items; it does not include the ingredients for making the circuits or cables. Operate the first lamp before expanding, then decide where more are needed.
Check the pole supply area and connection to power generation
- Check where you want to place the lamp and find a nearby electric pole.
- Place the lamp inside the pole’s electric supply area.
- Check whether that pole is connected to the network on the power-generation side.
- Check the power supply indicator and the lamp’s state.
- Check its brightness at night, or set it to always on for the test.
Having a pole nearby is not the same as having power supplied. If generation has stopped, first review Steam power: water, fuel, and connections.
A normal-quality lamp consumes 5 kW. Four lamps lit at once would use 20 kW, but check total factory demand including other machines. Do not decide how many generators you need from the lamp count alone.
Tell daytime shutoff from a fault
Lamps can be used for lighting at night and can also be set to stay on regardless of day or night. Do not assume that a lamp going dark during the day means its materials or pole are faulty.
| When it does not light | Check first |
|---|---|
| It is off only during the day | Day/night lighting setting; test the always-on option |
| No power supply indicator | Pole supply area and connection to generation |
| Power is insufficient at night | Generation, storage, and total factory demand |
| It turns off only after adding a condition | Circuit condition and the signal it receives |
If a solar-only power supply is a problem at night, see Solar panels and accumulator power overnight. Check lamp brightness separately from providing power overnight.
Try conditions and color after basic lighting works
Lamps can be assigned a color and can use circuit-network color signals. Do not change color, signals, and conditions all at once while the light itself is not working. Check power and lighting first, then add any needed settings one at a time.
If the lamp stops after connecting a circuit, check the signal and condition. As with reading the condition that stops an Inserter based on chest stock, check the received value separately from the comparison. This guide does not cover every RGB setting or precedence among multiple color signals.
Sources and scope of verification
The community-edited Factorio Wiki pages “Lamp,” “Lamp (research),” and “Electric system” were checked, including item names and quantities in the page HTML. The lamp page history notes that the ingredient changed from Iron Stick to Copper Cable in 0.17.0; the older recipe is kept separate. The verification covers the currently listed research name, normal-quality 5 kW draw, supply area, always-on setting, and color setting. The arithmetic example and diagnostic order are editorial organization. In-game placement on PC 2.0 series base game, all qualities, Space Age, every circuit setting, and differences across all patches have not been verified.
Sources and references
Questions and contributions
Share questions, corrections or play reports. Only approved posts for this article and language appear here.
Submit for review
Do not include personal details, passwords or private information about others. Text only. Publication and replies are not guaranteed.