Unlock and budget
PC release 1.2, standard settings, 100% clock, no mods. Source-based instructions, not a tested pipe layout. Complete Tier 8 Advanced Aluminum Production.
One Resource Well Pressurizer needs 10 Radio Control Units, 25 Heavy Modular Frames, 50 Motors, 50 Alclad Aluminum Sheets and 100 Rubber. Each Resource Well Extractor needs 10 Steel Beams and 10 Aluminum Casings. Budget pipes, poles and milestone deliveries separately.
Connect the two roles
- Identify the resource and satellite nodes.
- Place the central pressurizer and supply its standard 150 MW demand.
- Place extractors on activated satellites.
- Pipe each extractor to a destination using the same fluid.
- Prove one branch before expanding.
Extractors need no individual power connection, but still depend on the powered pressurizer. These are not ordinary Oil Extractors or water-surface Water Extractors.
Supply and bottlenecks
At 100%, an extractor yields 30/60/120 m³ per minute on impure/normal/pure nodes. Check each satellite. Two normal nodes calculate to 120 m³/min; that is arithmetic, not a validated network.
Pressurizer overclocking affects the whole well. Start at 100% and check power and pipe capacity first. Nitrogen also travels by pipe. Keep liquid head-lift diagnosis separate rather than assuming gas shares every condition.
Diagnose a stopped line
Cannot place: check unlock and central versus satellite position. Entire well stopped: check pressurizer power and standby. One branch stopped: check extractor connection, pipes and available downstream capacity. Increasing storage does not increase extraction or pipe throughput. Read buffer and flushing scope before emptying a whole network.
Sources and references
Questions and contributions
Submissions are currently paused. You cannot enter or send a post until reception resumes.