This guide covers PC 1.2 with standard costs and no mods. Sources were checked on October 20, 2026; this is not an in-game test. Build a first store that receives solid items by belt and sends them where needed.

Choose a standard or industrial container

BuildingUnlockBuild costSlots and ports
Storage ContainerTier 0 · HUB Upgrade 510 Iron Plates, 10 Iron Rods24 slots, 1 input, 1 output
Industrial Storage ContainerTier 4 · Logistics Mk.320 Steel Beams, 20 Steel Pipes48 slots, 2 inputs, 2 outputs

Slots are not individual items. Actual capacity depends on stack size and free slots. Unlock costs, connecting belts and foundations are excluded. Start with 1 item type in a standard container to make stock changes easy to follow.

Fill through the input, then decide whether to connect an output

  1. Choose the position Leave room for belts on both the input and output sides.
  2. Connect the input Run a belt from a production building's output into the container's input. Check that a few items arrive and appear in its slots.
  3. Choose storage or transit To test stockpiling, leave the output disconnected first. To supply another building, connect a belt to the output.
  4. Check the destination Verify which items leave and whether the receiving building accepts them. For different floors, see connecting Conveyor Lifts.

With both sides connected, items pass through. Stock falls if more leaves than arrives. A larger container does not make belts faster: 1 Mk.1 belt carries at most 60 items/min.

Do not treat the industrial container's 2 outputs as a balancer

The industrial version does not balance inputs or outputs. One side may receive more, and a preference based on belt placement order can change after reloading a save. Do not design around each output supplying half.

For even distribution, use a normal Splitter and check that the receiving belts have matching speed and available space. To fill storage first and divert only the excess, use Smart Splitter Overflow settings.

Troubleshoot stock and output

SymptomFirst check
Items pass through an empty-looking storeIs the connected output immediately carrying incoming items away?
Full container stops the incoming beltFree slots, blocked output and the destination's ability to accept items
The wrong item comes outMixed contents and the front of the output belt; separate stores by item type

A mixed container does not automatically sort items by purpose. Decide what to store and where the output goes before expanding a production route.

Sources and references

Questions and contributions

Share questions, corrections or play reports. Only approved posts for this article and language appear here.

Submit for review

Do not include personal details, passwords or private information about others. Text only. Publication and replies are not guaranteed.