Scope: PC release 1.2, standard settings, no mods. Start with a storage route carrying only Iron Plates; leave large-scale mixed-belt sorting for later.

Unlock it through Caterium research in the MAM

Unlock the Smart Splitter in the MAM separately from the regular Conveyor Splitter. Complete Tier 1 Field Research and build a MAM, then open the Caterium research tree.

  1. Obtain Caterium Ore and begin Caterium research.
  2. Complete the prerequisite research leading to Ingots, Quickwire, and AI Limiters by following the connections shown in the tree.
  3. Submit 10 AI Limiters and 50 Reinforced Iron Plates for the Smart Splitter research.
  4. Select the Smart Splitter from the build menu.

Building 1 unit costs 2 Reinforced Iron Plates, 2 Rotors, and 1 AI Limiter. Keep the research materials separate from the materials needed to build it. For Reinforced Iron Plates, see How to mass-produce them with an Assembler.

A regular Splitter cannot be configured with item names or overflow conditions. If no settings screen appears, check which type you built.

Set up a short route that prioritizes Iron Plates into storage

For your first setup, use a storage container as the excess destination too. This lets you observe the routing before any material is consumed by a Sink unintentionally.

  1. Prepare a supply container containing only Iron Plates.
  2. Connect a belt from the supply container to the Smart Splitter input.
  3. Connect 1 output to the storage container you want to fill first.
  4. Connect a different output to a container for excess items.
  5. Press E to open the splitter and set the storage output to Iron Plates and the excess output to Overflow.
  6. Set any unused output to None.

It matters less whether you use the left, middle, or right output for storage than whether the physical output you connected matches its setting on screen. Trace the belt to storage with your eyes before configuring it.

Check the route with empty and full storage

First empty the priority storage and feed Iron Plates to see whether they reach it. Next fill the storage, and wait until the belt before it is backed up; then check whether items go to the excess output. Finally, remove Iron Plates from storage and check that delivery to the storage output resumes.

Overflow does not read the inventory count in a storage container. It is a route used when no other output can accept that item. Even if storage has room, items can go to the excess output when the belt leading to storage is too slow and backs up.

If items overflow before storage is full, check the connection and belt speed between the splitter and storage. Increasing input speed increases overflow when the storage-side throughput stays the same.

Distinguish Any, Any Undefined, and Overflow

SettingMeaning on this Iron Plate route
Iron PlatesSend Iron Plates to this output
OverflowSend items here when no other output can take that item
Any UndefinedSend items not specified by name on another output
AnyAccept items that can pass and share them with other available outputs
NoneDo not send items to this output

If the storage output is set to Iron Plates and the excess output to Any Undefined, Iron Plates are already specified, so they cannot escape through Any Undefined when storage is full. Also, if you set the excess output to Any, Iron Plates are shared from the start, even while storage is empty.

Overflow also passes items that have no other specified destination. If you later mix another material into the supply container, check what reaches the excess output before continuing operation.

Connect a Sink after checking the behavior

To turn excess Iron Plates into Coupons, replace the destination on the excess output with an AWESOME Sink. For unlocking, powering, and printing at the Sink, see How to Use the AWESOME Sink and Shop.

What stopsCheck first
Nothing flows to either outputInput direction, contents of the supply container, and output settings
Everything stops when storage is fullIs the excess output set to Any Undefined or None?
The excess container is also fullIs there room at the destination for excess items?
Items back up before the SinkSink power, whether it accepts the item, and the belt route
Items split while storage still has roomIs the excess output set to Any, or is the belt to storage backed up?

Before changing settings, note the conditions on all 3 outputs so you can restore them. Start with a route for 1 item type and 1 machine, then expand the same approach to the storage you need.

Sources and references

Questions and contributions

Share questions, corrections or play reports. Only approved posts for this article and language appear here.

Submit for review

Do not include personal details, passwords or private information about others. Text only. Publication and replies are not guaranteed.