Scope: PC release 1.2, standard settings, no mods. This guide covers recovering 1 Hard Drive at a Crash Site and using your first alternate recipe.

Read the requirements on the Crash Site pod

At a Crash Site, look separately for loose parts scattered around the site and the cargo pod containing a Hard Drive. Picking up the parts alone does not recover the drive.

  1. Approach the pod and press E to open its screen.
  2. Check the listed items, quantities, and power requirement.
  3. Gather the required parts, and if power is required, connect a power line to the pod.
  4. When the requirements are met, operate the handle on the screen to open it.
  5. Take the Hard Drive inside and check that it is in your inventory.

Requirements vary from site to site. Do not assume that the parts or number of generators that worked at the previous site will work at the next one. If you are short of anything, note the location and requirements, then prepare what is needed.

If you use a Biomass Burner on site, bring fuel as well as the building materials. If the pod does not open after you connect a power line, check that it receives the required power and that the generator is running. See Early-game power and fuel checks.

Start a 10-minute analysis in the MAM

Unlock the MAM through Tier 1 Field Research. If you have already researched Power Slugs or another topic, you can use the same MAM.

  1. Open the MAM and select Hard Drive analysis.
  2. Use 1 recovered drive to start the analysis.
  3. When the 10-minute research finishes, check the MAM result.
  4. In the Hard Drive library, view the choices for that drive.

The MAM itself does not need a power connection. Building more than 1 MAM still lets you analyze only 1 Hard Drive at a time. There is no need to increase the MAM count to run analyses in parallel.

If a message says there are no available rewards, progress HUB Milestones or MAM research to meet more prerequisites for choices, then check again. A drive does not guarantee a different recipe just because it was found at a different site.

Choose 1 of 2 rewards or hold the choice in the library

Analysis presents 2 choices, and you choose 1. The choices can include an alternate recipe or an inventory expansion.

If you are not ready to decide, you can leave the reward unselected in the library. You can analyze another drive while a choice is on hold, then return after checking the materials in your factory. A held choice is not a learned recipe.

Each drive allows 1 reroll. It does not let you call up a specific recipe that was not offered. If one of the current choices could help you, check its materials and equipment before deciding whether to reroll.

The initial choices are set when analysis starts. Unlocking a new Tier during the 10-minute wait does not change the initial pool of choices for that analysis.

Choose a recipe based on what you want to improve in the factory

An alternate recipe makes the same product with different materials or steps. It is not always an upgrade on every measure. Check the following to avoid unlocking a recipe you cannot use yet.

What to checkHow to decide
Required materialsCan you mine and transport those resources now?
Production buildingCan you unlock and build the required building?
Inputs and outputs per minuteCan the existing belts and previous production step supply it?
Pipes and powerDo you want to build any newly required connections now?
Reason for switchingWhich shortage, production step, or transport problem do you want to improve?

For example, if screw transport often backs up your factory, compare how the recipe changes the screw requirement and production steps. If the alternative needs another resource transported from far away, you can keep using the standard recipe and hold the choice for later.

As a baseline for a standard Reinforced Iron Plate line, see Assembler steps for 30 Iron Plates/min and 60 Screws/min. After switching to an alternate recipe, do not reuse those standard-recipe rates as-is; recalculate using the requirements in the building screen.

What to check when the chosen recipe will not work

StateWhat to check
It does not appear at the Craft BenchAlternate recipes run in production buildings. Open the matching building screen
It does not appear in a production building eitherDid you actually choose the reward, and did you open the right building?
The choice is still in the libraryA held choice is not learned yet. Select the reward you want to use
The recipe is available but does not produceCheck the new recipe’s materials and quantities, power, and room for the output
The recipe you want is not offeredCheck your research prerequisites and remember that choices are randomized

Try the change in 1 building first. If you leave the old recipe’s input belts connected, materials that the new recipe does not need can back up at the input. Sort out the required materials and input ports, then confirm that the product comes out before expanding the change across the factory.

Before exploring areas with steep drops, also see How to research, craft, and deploy the Parachute.

Sources and references

Questions and contributions

Share questions, corrections or play reports. Only approved posts for this article and language appear here.

Submit for review

Do not include personal details, passwords or private information about others. Text only. Publication and replies are not guaranteed.