For the PC 1.6 base game without DLC or mods, repairing breakdowns in existing equipment such as coolers and generators. Not mental breaks, Console Edition or mods that change repairs.
Read the type of stoppage
| Equipment state | First distinction |
|---|---|
| Broken down | Requires replacement with a normal component |
| Insufficient power or disconnected | Inspect generation, demand and wiring; supplying a component does not provide power |
| Reduced HP | Repairing building damage and replacing broken components are separate problems |
| Solar flare stops many devices | Check event ending and power; replacement does not shorten the flare |
| Empty fuel or switched off | Check fuel and the building’s own operating switch first |
A breakdown repair uses 1 normal component, never an advanced component. Even equipment built with expensive materials does not require its entire construction recipe again. For supply, see mining, trading and component fabrication (Japanese).
Replace the component and restore operation in 6 steps
- Pause and inspect critical equipment. Prioritize generation and essential temperature control. If a cooler stopped, inspect room temperature and food condition too.
- Read the specific building’s status. Distinguish Broken down from power, fuel, switch and HP problems.
- Include the building in Home area. Check Architect’s Zones. This differs from the worker’s Allowed area; review only the needed equipment surroundings.
- Make normal components reachable. Prepare one attempt plus a reserve, checking forbidden status and the worker’s access. One component does not guarantee a successful repair.
- Assign a construction worker and inspect the job. Enable Construct in Work. Select the colonist and right-click the equipment to inspect priority work or the reason it is unavailable; check skill, health and competing jobs.
- Confirm status and actual operation. After replacement, verify Broken down disappears and power/fuel allow operation. A broken battery loses stored energy; repair does not restore its previous charge.
Component fabrication uses Smith; breakdown repair uses Construct. Having a component maker does not by itself assign anyone to construction work.
Components present but no repair
| State | Next check |
|---|---|
| Nobody approaches | Home area, Construct, allowed area, route, schedule and priority |
| Missing materials | Normal component type, forbidden state and actual access |
| Repair fails and uses a component | Repair Success Chance, Construction skill, manipulation and sight |
| HP repaired but still stopped | Broken down status, power and fuel separately |
| Repaired cooler still does not cool | Powered cooler orientation, hot-side exhaust and target temperature |
| Repaired battery remains empty | Recharge from surplus generation; lost energy is not restored |
A failed breakdown repair consumes the component and leaves the equipment broken. Inspect the worker and Repair Success Chance before assuming that more parts guarantee success in one attempt. A general skill table alone does not establish every injured worker’s actual chance.
Restore the affected services afterwards
Power returning does not resolve every freezer temperature and exhaust issue. Check surplus generation for battery connection and charging. For a flare, follow outage priorities.
Plan repair reserves separately from construction materials and keep a worker and access available for critical equipment. Home area also affects cleaning and firefighting: inspect necessary places rather than expanding it across the whole map just for diagnosis. Separate breakdown, materials, worker and power before rebuilding equipment unnecessarily.
Sources and references
Questions and contributions
Submissions are currently paused. You cannot enter or send a post until reception resumes.