View the 5×5 layout for 15 bookshelves. Use the table and checklist below while gathering materials.

This guide covers ordinary Bedrock Edition 26.50 Survival, from preparing the setup to upgrading a first item. It assumes no mods, experimental features, or villager-trade changes. If your base is not secure yet, start with Preparing for Your First Day.

If you need to mine diamonds or obsidian first, see Your First Underground Expedition.

Gather materials for the table and bookshelves separately

An enchanting table needs 1 book, 2 diamonds, and 4 obsidian. Each ordinary bookshelf needs 3 books and 6 planks. To craft all 15 ordinary bookshelves yourself, set aside the following:

To craftDirect materialsIf making the books from paper and leather
1 enchanting table1 book, 2 diamonds, 4 obsidian3 paper, 1 leather
15 bookshelves45 books, 90 planks135 paper, 45 leather
Total for both46 books, 90 planks, 2 diamonds, 4 obsidian138 paper, 46 leather

This table counts the setup materials only. It does not include the item to enchant, lapis lazuli, or the tool needed to mine obsidian. If you stop mining after finding only 2 diamonds, you may be unable to collect the obsidian because you still need a diamond pickaxe.

You can start using the enchanting table with fewer bookshelves before you have all the books. Whether to improve your gear with a lower-level option now or save materials until you have 15 depends on your next destination and the gear you already have.

Check materials and requirements before enchanting
Prepare 15 bookshelves, 1 table, and one use of the bottom option

Checks work while this page remains open. Saving requires JavaScript.

If you collect finished books, no extra paper or leather is needed. Prepare a tool to mine obsidian and materials for the item you want to enchant separately.

Place 15 bookshelves around the outside of a 5×5 layout

The top-down layout shown here leaves the lower-center block of the 16-block outer edge open as an entrance. It provides a path to the enchanting table in the center and makes the one-block gap between the table and shelves easy to check.

  1. Place the enchanting table in the center of a flat 5×5 area.
  2. Leave a one-block-wide path around the table.
  3. Place ordinary bookshelves outside that path.
  4. Count 15 shelves, leaving one outer block open as the entrance.
  5. Put an item in the table and check the required level shown below.

Bookshelves directly touching the table or placed farther away as decoration do not replace this layout. A chiseled bookshelf, which can store and retrieve items, is different from an ordinary bookshelf used to improve enchantment options.

Keep the path between the shelves and table clear; do not put torches, carpets, or other obstructions there. Move lighting to the ceiling or another place that does not block the path. If the displayed level is wrong, check the bookshelf type, count, and gap in that order before rebuilding the room.

5×5 overhead layout | 15 ordinary bookshelvesA single layer with the table and bookshelves at the same height. Cells use text as well as color.

Shelf = 15 ordinary bookshelves / Table = 1 enchanting table / Air = the one-block gap / Entry = the opening in the outer edge

This is not a two-layer bookshelf layout. Keep the gap and the space above it clear of torches, carpets, and other obstructions. Walk from the entrance to the central table.

Check lapis lazuli and experience level requirements

Put the unenchanted target item in the table and place lapis lazuli in its dedicated slot. An option cannot be selected if your current level is below its requirement. A setup that offers a level-30 option does not mean the player already has level 30.

Option positionLapis lazuli consumedExperience levels consumed
Top11 level
Middle22 levels
Bottom33 levels

For example, choosing the bottom option at level 30 leaves you at level 27. To choose another option that requires level 30, you must earn levels back to 30. Adding more lapis lazuli cannot make up for a level shortage.

Check the options before using your main gear

Choose one first goal, such as improving a mining tool, then insert the item you want to use and inspect the options. Other enchantments may be added along with the displayed one, and the table does not let you specify an entire combination freely.

If the options are not suitable, you can leave without confirming and keep your materials. Enchanting a different tool or book will refresh the options. If you try that, first decide whether you are willing to spend up to 1 experience level and 1 lapis lazuli. Do not repeatedly break and replace the table as a refresh method.

Add a Silk Touch book to an expedition pickaxe with an anvil

An item enchanted at a table cannot be returned to that same table for additional enchantments. Once you have a Silk Touch enchanted book, use an anvil to apply it to an expedition pickaxe. This section is for ordinary Bedrock Edition Survival and assumes the pickaxe does not have Fortune.

  1. Open the anvil. Put the pickaxe to upgrade in the left input slot and the Silk Touch book in the right input slot (to the right of the plus sign). Do not reverse them.
  2. Check the result slot after the arrow and confirm that the pickaxe shows Silk Touch. Read the enchantment list instead of relying only on the glint.
  3. Compare the displayed level requirement with your current level. The anvil consumes the number of levels shown and does not use lapis lazuli. This differs from the enchanting table’s “requires 30, consumes 3” system.
  4. Confirm the result and cost, then take the item to complete the operation. The book is consumed and your level drops by the displayed amount. If unsure, do not take the result; return the input pickaxe and book instead.

The cost depends on the pickaxe, the book’s prior anvil work, and any enchantments combined with it. Do not assume Silk Touch always costs a fixed number of levels; check the displayed cost for that combination. Adding another Silk Touch book to a tool that already has Silk Touch does not make Silk Touch II.

If you are stuckWhat to check and do next
No result appearsCheck that the tool is on the left and the enchanted book on the right. An ordinary book cannot apply an enchantment.
You are trying to apply an incompatible enchantmentFor example, a book with only armor enchantments cannot be used on a pickaxe. A book with multiple enchantments transfers only compatible ones.
The pickaxe has FortuneSilk Touch and Fortune cannot coexist on the same tool. Keep the Fortune tool and prepare another pickaxe.
The cost is shown, but you lack levelsEarn enough levels to meet the displayed requirement and return. Lapis lazuli and an anvil operation do not supply experience levels.
This book operation costs 40 levels or moreIt exceeds the one-operation limit in ordinary Survival. Raising yourself above level 40 will not fix it; try a tool or book with less prior anvil work.

Even if a multi-enchantment book shows a result, do not confirm unless Silk Touch transfers to the pickaxe. This prevents losing the book while applying only unwanted enchantments. Anvil cost calculation differs in Java Edition, so do not apply another edition’s cost table. Afterward, check the enchantment in your inventory before setting out. Once your first item is ready, put spare unenchanted gear, remaining books, and lapis lazuli back in a chest, and confirm which item you upgraded before leaving.

When you are ready, continue to What to Bring and How to Return from Your First Nether Trip. For ranged weapons, see How to Load and Fire a Crossbow.

Sources and references

Questions and contributions

Share questions, corrections or play reports. Only approved posts for this article and language appear here.

Submit for review

Do not include personal details, passwords or private information about others. Text only. Publication and replies are not guaranteed.