Scope: Java 26.3 series in normal Survival, with no experimental features or mods. This guide covers a first activation to support underwater construction.

Gather the Conduit materials and frame blocks separately

Item to prepareQuantity and use
Heart of the Sea1 for crafting the Conduit
Nautilus Shells8 for crafting the Conduit
Prismarine or other valid blocks16 total for the smallest frame
Temporary blockTo place the Conduit in the center; remove it afterward
PickaxeTo remove the temporary block or move the Conduit

Look for a Heart of the Sea in a buried treasure chest. Nautilus Shells can come from fishing, trading with a wandering trader, or Drowned that carry a shell. You may not find enough of either item as soon as you go to the ocean.

If you plan to fish for shells, see how to prepare a fishing rod and use it. For travel on the water, how to ride and retrieve a boat may also help.

Craft the Conduit by placing the Heart of the Sea in the center of a crafting table and Nautilus Shells in the surrounding 8 slots. This makes one Conduit; the activation frame is separate.

Make a 5×5 outer frame with one water block between it and the center

Valid frame blocks are Prismarine, Prismarine Bricks, Dark Prismarine, and Sea Lanterns. You can mix them, but stairs and slabs are not substitutes.

For a first build, stand a square frame underwater that is 5 blocks wide and 5 blocks tall. Leave the interior empty and build only the outside ring; it takes 16 blocks.

This is the smallest layout, viewed from the front. P marks the frame, C the Conduit, and dots the water space.

P P P P P
P . . . P
P . C . P
P . . . P
P P P P P
  1. Underwater, place 5 blocks side by side to make the bottom of the frame.
  2. Extend both ends upward and close the frame at the top, making it 5 blocks tall.
  3. Count 16 blocks around the outside and check that the interior is a 3×3 space.
  4. Use a temporary support block to place the Conduit exactly in the center of the frame.
  5. Break the temporary support so the center returns to water.
  6. Check that the 3×3×3 area including the Conduit is filled with water.

Water is needed in front of and behind the center too, not only in the front-facing diagram. Do not attach the frame directly to the Conduit or leave a wall immediately behind it; keep the 26 surrounding spaces around the Conduit filled with water. A spot that is too shallow or a Conduit placed directly on the seabed may not leave enough room.

After activation, check the effect underwater

When activated, the Conduit changes appearance and grants Conduit Power to players underwater within range. Under Conduit Power, the oxygen meter stops decreasing; the effect also improves underwater visibility and mining speed.

With the smallest 16-block frame, the effect range is about 32 blocks from the center. First check for the effect indicator near the Conduit, and do not stay underwater for a long time before it appears. The effect is not available while you are still building, so keep a route to the surface where you can breathe.

This 16-block frame is not the maximum configuration. To also attack nearby hostile mobs that are touching water, you need the 42-block configuration with frames aligned in three directions. Do not start work expecting the smallest frame to defeat enemies for you.

If you are draining an area, keep the water around the Conduit separate from the area you drain with sponges. Draining the water around the Conduit can break its activation conditions.

Check materials, center, and water in order if it does not work

SymptomWhat to fix
No effect after placing the ConduitDid you build a frame of 16 valid blocks, not just place the Conduit?
It does not work even though it is PrismarineAre these full blocks rather than stairs or slabs?
The frame is there but remains inactiveIs the outer size 5×5, is the Conduit centered, and is there one water block of space between it and the frame?
It looks correct from the frontCheck the temporary block under the Conduit, walls in front and behind, and any air around it.
It is activated but no effect appearsReturn underwater near the Conduit and check the effect indicator.
Nearby hostile mobs touching water are not attackedAre you confusing the smallest frame with the 42-block maximum configuration?

You can break and retrieve the Conduit with a pickaxe if you want to move it. Placing it at a new location will not activate it by itself, so build the frame and water space there too.

For help with movement or mining on land, see the beacon base and effect settings. Unlike a Conduit frame, a beacon uses a base filled all the way through with valid blocks.

Sources and references

Questions and contributions

Share questions, corrections or play reports. Only approved posts for this article and language appear here.

Submit for review

Do not include personal details, passwords or private information about others. Text only. Publication and replies are not guaranteed.