Scope: Java 26.3 series, normal Survival, with no experimental features or mods. This guide covers using a first beacon after obtaining a Nether Star.

Prepare the beacon, base, and effect payment separately

Craft the beacon from 5 glass, 1 Nether Star, and 3 obsidian. Obtain the Nether Star by defeating the Wither; it is not a drop from the Ender Dragon.

Arrange the crafting ingredients as follows:

LeftCenterRight
GlassGlassGlass
GlassNether StarGlass
ObsidianObsidianObsidian

Also prepare 9 iron blocks for the base and 1 iron ingot to pay when setting the effect. If you make the smallest base from iron alone, that is 81 ingots for the base plus 1 payment, for 82 ingots total. Count these separately from the beacon's crafting ingredients.

You can also build the base from gold, emerald, diamond, or netherite blocks, and you can mix valid block types. Choosing an expensive material from the start does not make the effect stronger at the same number of tiers. Copper blocks and raw iron blocks are not substitutes.

Start with a complete 3×3 base

  1. In an open area, lay iron blocks in a 3-wide by 3-deep square.
  2. Check that all 9 spaces, including the center, are filled.
  3. Place the beacon on top of the center iron block.
  4. Look directly above the beacon and check whether a dirt or stone ceiling blocks its beam.
  5. Confirm that a beam extends upward.

Unlike a Conduit, a beacon does not use an outer frame with an empty center. Do not leave the center of the base open; place an iron block directly below the beacon.

Starting underground adds a ceiling check, so it is easier to diagnose the first activation in a place with open sky above. If you enclose the beacon in a building later, check that you have not added a stone roof directly overhead.

Choose and confirm an effect after the beam appears

  1. Right-click the beacon to open its settings screen.
  2. For a one-tier base, choose either Speed or Haste.
  3. Put 1 iron ingot in the payment slot.
  4. Press the check mark to confirm.
  5. Stand near the beacon and check the status effects in your inventory screen.

The 1 item paid in the screen is separate from the 9 iron blocks in the base. You can also pay with a gold ingot, emerald, diamond, or netherite ingot, but a more expensive payment does not strengthen the effect.

This payment sets the effect; it is not fuel that you must keep adding while the beacon runs. To change the effect, open the screen again with another valid payment item.

The beam shows that the structure is active, but it does not replace choosing an effect. A beacon can glow as decoration even if you have never confirmed an effect in its screen.

Build four tiers if you want Haste II

Base tiersEach layer, from top to bottomTotal base blocks
1 tier3×39
2 tiers3×3, 5×534
3 tiers3×3, 5×5, 7×783
4 tiers3×3, 5×5, 7×7, 9×9164

Center each layer and fill it all the way through. A single 9×9 layer is not four tiers. The total of 164 blocks for four tiers does not include the beacon itself.

At four tiers, choose either Regeneration as the secondary power or an upgrade of the selected primary power to II. If you want Haste II, choose Haste as the primary power, then select its upgrade as the secondary power and pay to confirm. Do not expect to select Regeneration at the same time.

Mining speed also depends on your tool and the block you are mining. A beacon does not make every stone break instantly; also see how to prepare enchantments for your tools.

Check the beam, settings, and position when it does not work

SymptomWhat to check
No beam appearsIs the base filled with valid blocks through the center, and is the beacon above the center?
It stopped after you built a roofDid you add dirt or stone directly above the beacon?
The beam appears but there is no effectDid you choose an effect, add a payment item, and confirm with the check mark?
You cannot choose Haste II or RegenerationAre all four base tiers filled and recognized?
The effect ends when you move awayReturn closer to the beacon. The visible beam distance and effect range are different.
Something changed after you broke part of the baseCheck for a missing layer or a section refilled with a different block.

For underwater breathing or visibility, see how to activate a Conduit. Its frame and materials differ from a beacon, so do not reuse the same base.

Sources and references

Questions and contributions

Share questions, corrections or play reports. Only approved posts for this article and language appear here.

Submit for review

Do not include personal details, passwords or private information about others. Text only. Publication and replies are not guaranteed.