A separate calcite-processing recipe

Scope: PC stable 2.1.23, Space Age, normal quality, no modules or additional mods. Official versioned recipes and technologies were checked; this is not a measured production-line test.

After discovering Vulcanus, mining calcite unlocks calcite processing, which includes simple coal liquefaction. Merely placing a refinery does not unlock it. Check research progress first.

The base recipe is 10 coal + 2 calcite + 25 sulfuric acid → 50 heavy oil in 5 base crafting seconds. Crude oil, steam and starter heavy oil are not inputs. Light oil and petroleum gas are not direct outputs.

Start one refinery

  1. Select Simple coal liquefaction in an oil refinery.
  2. Insert coal and calcite as ingredients; coal is not burned as machine fuel here.
  3. Check fluid ports in Alt mode and connect sulfuric acid to the specified input.
  4. Connect heavy-oil output to storage or consumption with free capacity. No return to a heavy-oil input is required.
  5. Power refinery and inserters; confirm flow before expanding.

At refinery crafting speed 1 with no modifiers and uninterrupted supply, one machine calculates to 2 coal, 0.4 calcite and 5 acid consumed per second for 10 heavy oil. These are recipe calculations, not measured pipe performance or a guarantee through power failures.

Add downstream processing for gas

Heavy oil cannot directly make plastic. Research the relevant processes, crack heavy oil into light oil and then petroleum gas in chemical plants, and supply water to those separate steps. Lubricant also requires its own recipe.

Do not feed that water or steam into the simple-liquefaction refinery. Keep the acid input distinct from downstream cracking water. See oil-output and cracking troubleshooting (Japanese).

Fix the stopped stage

If the recipe is absent, check research and Space Age. If inputs are missing, inspect coal, calcite and acid. For acid, trace the port and source; for solids, check inserter direction and electricity.

A full heavy-oil output stops the refinery. Restore consumption or removal before adding machines. A blocked light-oil or gas stage can eventually prevent heavy-oil consumption too.

Regular coal liquefaction (Japanese) uses steam and a heavy-oil return loop. When changing processes, recheck the selected recipe and every pipe rather than swapping their input requirements.

Sources and references

Questions and contributions

Submissions are currently paused. You cannot enter or send a post until reception resumes.

Posting rules and data storage