Scope: PC 2.0 base game, normal quality, no mods, mouse and keyboard. This example copies a recipe between two already placed assemblers of the same type. Space Age, mods, controls on other platforms, and in-game testing are outside scope. If you changed key bindings, follow settings.
Conditions for the source and destination
| Check | Assumption here | Why it matters |
|---|---|---|
| Source | Assembler with a recipe selected | The source entity must still exist when you paste |
| Destination | Same type or upgrade-compatible entity | Use a destination that accepts the copied settings |
| Settings copied | Recipe and circuit or logistic conditions supported by that entity | Review the settings after pasting |
The source must remain in the world until you have pasted its settings. Do not remove it or replace it with another machine first; copy to the destination before clearing the source.
Six steps to copy a recipe to another assembler
- Choose two placed assemblers. Use one as the source and the other as the destination.
- Set the recipe on the source. Check the recipe name and required input items.
- Copy settings with Shift + right-click. Target the source assembler.
- Paste with Shift + left-click. Click the destination assembler. If the cursor does not visibly change, that alone does not mean the copy failed.
- Open the destination settings and compare. Check the recipe and, if needed, supported settings such as circuit conditions.
- Provide materials and power. A copied recipe does not mean the machine can produce; check its inputs and power.
Copying settings is different from duplicating a placed entity with Ctrl+C / Ctrl+V. This procedure copies settings to an entity that is already placed. Seeing the recipe does not add materials or power.
Settings copy versus placement duplication
| Action | Target | Result |
|---|---|---|
| Shift + right-click, then Shift + left-click | Settings of a placed entity | Copies settings supported by the destination |
| Ctrl+C / Ctrl+V | Entity to be placed | Creates a placement copy |
| Remove the source before copying | Source settings | The source is gone and its settings cannot be read |
Use settings copy on entities of the same type or compatible through an upgrade. Circuit or logistic conditions supported by the entity may also be copied. For an assembler, compare its recipe and circuit conditions; if you do not want a condition copied, inspect and change the destination settings.
If settings do not copy or the machine will not run
| State | What to check | Next action |
|---|---|---|
| Cursor appearance does not change after clicking | Whether you used the Shift copy and paste actions | Open the destination settings and check the result |
| Paste does not work | Whether the source remains and the target is compatible | Select the source again and use a compatible destination |
| Same recipe but machine is stopped | Materials, power, and copied circuit conditions | Check settings and supply separately |
| An old stop condition was copied too | Whether circuit conditions were copied | Compare conditions at the destination and change them if unwanted |
For a different use—copying material requests from an assembler to a requester chest—see Using requester chests for equipment (Japanese article). To stop an inserter based on chest stock, see Setting an inserter limit from chest contents. Copying settings does not increase the number of placed machines or add materials.
Sources and references
Questions and contributions
Share questions, corrections or play reports. Only approved posts for this article and language appear here.
Submit for review
Do not include personal details, passwords or private information about others. Text only. Publication and replies are not guaranteed.