Prepare a root plant and machines

For PC1.3, normal settings, solo without mods, ordinary Wood only. Start after planting and watering Root Seed, able to distinguish the planted root from wood spreading around it. Other tree types such as Coral Wood and guaranteed output rates are outside scope.

Use one Crude Drill for a small trial. Craft it at the Automation Table from eight Tin Bars. See drill preparation for the generator and workbench prerequisites. Its cutting head affects more than wood: keep roots, chests and working characters away from the target.

Automatic chest storage also needs a Robot Arm and a chest. One arm costs five Iron Bars and five Scarlet Bars at the Automation Table. At the tin stage, collect the drill’s output by hand first; it will not automatically enter a chest before the storage machinery exists.

Test one plant from cutting to storage

  1. Disconnect power before positioning. Aim at the tile where wood grows out, not the planted root itself, and leave output space behind the drill.
  2. Keep the intended growth direction open and consider walls on the other sides. Do not wall over the plant or its growth target. Do not start with many plants and drills.
  3. Connect a generator by adjacency or wire and check the yellow powered notches. From a safe path, watch growing wood break and emerge behind the drill.
  4. Pick up the first output manually and confirm the root survives and grows again. If the root disappears, stop, correct the target/direction and replant.
  5. For automatic storage, position floor output in front of an arm and an available chest behind it. If separated, connect the pickup point using a short conveyor route.
  6. Power the arm too. Begin without a filter and check that Wood increases inside the chest. Floor drops alone are not completion; confirm storage and regrowth before expanding.

Separate the source, cutting tile and output

The planted root must stay; do not target it for cutting or collection. Keep the wood-growth tile open and within the head’s target. The drill’s rear is the floor-output point. The arm takes from its front and passes backward to the chest; check direction and free space.

For a stopped drill, check power and direction. For no regrowth, check the root, watering and available ground. Wood accumulating on the floor means cutting works: examine arm direction, filter and chest space first. A moving belt does not prove the drill or arm has power.

Protect the plant before expanding

This is not a replanting machine. Breaking the root removes the production source and requires another seed and watering. Keep spare seeds rather than assuming a destroyed plant always returns one.

Blades and transport paths also affect characters. Disconnect power while adjusting and keep a separate walking path. This is a small verification workflow, not a guarantee of exact output, optimal dimensions, offline operation or operation at every distance. Confirm one plant regrows and its Wood reaches storage. Individual layouts have not been tested in-game here.

Sources and references

Questions and contributions

Submissions are currently paused. You cannot enter or send a post until reception resumes.

Posting rules and data storage