Materials and purpose
Source review for PC 1.3, normal settings, no mods. Processing speed and console controls have not been play-tested.
One Robot Arm costs 5 Iron Bars and 5 Scarlet Bars at an Automation Table. The table costs 5 Copper Bars and 8 Tin Bars at a Tin Workbench; reaching that table does not supply the arm's later materials. Keep collecting by hand if you do not yet have scarlet.
Align input, output and power
- Put the item source in front of the arm and a chest with space behind it. Test a few loose items first. Rotate before placement with R on default PC controls.
- Supply electricity from a generator via wiring as needed. Look for yellow notches on the machine base. A moving conveyor is not evidence that the arm has power.
- Start without a filter. Check that items enter the rear chest rather than landing on the ground, and inspect its contents and capacity.
- Attach the belt only after this works. For smelting, verify that the receiving furnace or smelter accepts the material.
Arms can also take items from chests and finished products from processing equipment. Check both ends; freshly inserted ore does not mean a finished bar is already available.
Choose one item with a filter
The default setting picks up items without limiting their type. To select one type, carry an example in your inventory and choose it with the filter's picker. Check for an old filter when changing materials. Ordinary Robot Arms do not plant seeds in tilled soil; Robot Farm Arms serve that purpose.
If it does not transfer
- Check the power indication and the connection back to the source.
- Confirm the item is in front, not beside the arm or beyond it on the output side.
- Match the filter. Test small quantities and change one condition at a time.
- Check the output side, available storage and whether processing equipment accepts the item.
After chest transfer works, extend the Conveyor Belt route. Shorten the failing section to find a blockage instead of feeding more items into it.
Sources and references
Questions and contributions
Submissions are currently paused. You cannot enter or send a post until reception resumes.