Materials and access

This is a source-based guide for PC 1.3, normal settings and no mods. Console buttons and long-distance operation have not been play-tested.

Make an Automation Table at the Tin Workbench using 5 Copper Bars and 8 Tin Bars. At that table, 2 Tin Bars produce 5 Conveyor Belts. Belts alone need no iron, scarlet or generator.

Build straight, then add a corner

  1. Choose safe floor and leave the collection end clear. Start with a short route and a few items.
  2. Lay consecutive belts and watch their animation. Highlight a tile and use the rotate control—R by default on PC—to correct its direction.
  3. At a corner, aim the outgoing direction at the next belt. Initial orientation follows neighbouring belts, so building backwards from the destination can help. Inspect each tile afterwards.
  4. Follow a few dropped items to the end. Items still inside your inventory or a chest do not automatically enter the belt.

Diagnose the stopping point

SymptomCheck first
Items move back and forthTwo adjacent belts facing each other
Items stop or leave at a cornerThe corner's outgoing direction and next tile
Items gather beside a chestA transfer device is needed for storage
Belt runs but no ore arrivesDrill power, orientation and remaining ore

Belts also carry characters. Leave a separate walking route while adjusting them. A moving belt does not prove that a neighbouring drill or arm has power.

Connect mining and storage in stages

First check the Crude Drill, then collect ore from its rear. Do not assume touching a chest stores items: check the Robot Arm transfer separately. This guide does not guarantee remote operation, production with the game closed or a fixed throughput.

Sources and references

Questions and contributions

Submissions are currently paused. You cannot enter or send a post until reception resumes.

Posting rules and data storage