Build with Plains-era materials
Use the Hammer within Workbench range: 20 Wood, 6 Tar, 10 Iron and 8 Stone. Keep extra wood for fuel. The building ID is piece_bathtub.
See tar-pit drainage for tar. Check the material list before planning construction if iron is not ready.
Leave access and ventilation
- Prepare a supported surface within Workbench range.
- Place the tub near your usual resting spot with access for refueling.
- Leave room for smoke to escape before adding wood.
- Check that heating continues and inspect comfort from the resting position.
Do not seal the furnace under a low indoor ceiling. Check smoke accumulation and where you stand, not just chimney appearance. This guide does not prescribe an unverified chimney size or smoke interval.
Comfort is not your total base score
The building’s value is 2. Compare the display at the same resting spot before and after heating; a distant tub may not contribute. Do not spend materials assuming multiple tubs add their values together.
This supports longer Rested duration, not higher maximum health or stamina in place of food. See Rested and comfort for basic resting conditions.
Heat or comfort missing
Check fuel first, smoke clearance if heating stops quickly, and position if comfort stays unchanged. Change one condition at a time.
PC stable 1.0, normal settings, no mods; official 1.0.20 notes, current building data and existing heating/smoke documentation reviewed. No live placement test or exact burn-time claim. The English name identifies the object where localized names differ.
Sources and references
Questions and contributions
Submissions are currently paused. You cannot enter or send a post until reception resumes.