To collect tar from a Plains tar pit, watch for Growth and dig a low trench outside the pit to connect it. The liquid in the pit is tar, not water. As its level drops, submerged tar deposits become easier to reach. Tar can remain in nearby depressions after draining, so check the surrounding ground as well as the rim.
This guide covers PC 1.0.17, standard settings, and no mods. Official patch information is used to identify the version scope; it does not guarantee the draining method below. The collection method was cross-checked against guides and unofficial data, while respawning was checked separately against a historical player report. Reproduction in-game and across different terrain was not tested.
Prepare before approaching a tar pit
Tar pits are in the Plains and guarded by Growth. Their attacks can inflict the tarred effect and impede movement, so check for enemies and an escape route before entering the liquid.
| Prepare or check | Why |
|---|---|
| Pickaxe | Dig a drain trench to a point lower than the pit |
| Weapon and food for recovery | Prepare for Growth and other Plains enemies |
| Footing outside the pit | Work without falling into the liquid |
| Escape route | Avoid being cornered in the trench |
Choose between Growth drops and pit collection
| Method | What you collect | What to consider |
|---|---|---|
| Defeat Growth | Tar dropped by the enemy | Decide whether you can defeat it safely, even if you only need a small amount |
| Lower the pit's liquid level | Tar deposits in or around the liquid | If you can secure a lower outlet and a retreat route, dig a trench to expose more deposits within reach |
Defeating an enemy and draining the pit's liquid are separate actions. Do not assume draining makes the area a safe base; do not start collecting while enemies remain. The amount collected and ideal trench dimensions may vary by terrain.
Connect a trench and drain the pit
- Deal with Growth and nearby enemies. Choose a safe fighting position and a retreat route. If you cannot handle the enemies, postpone collecting.
- Choose an outlet. Find ground lower than the tar's liquid level to act as a catchment. Do not plan to send the liquid toward your escape route.
- Dig a trench with a pickaxe. Start outside the pit and make the trench bottom lower than the tar’s liquid surface.
- Connect the trench to the pit. Open the soil at the rim last to create a path for the tar to flow out. Do not stand in the trench; watch from footing outside to see whether the level drops.
- Collect tar at the bottom and rim. Approach after the level drops and check for the collection prompt. Confirm that the tar count in your inventory increases.
- Check nearby depressions too. If liquid or deposits remain, search the low ground outside the rim.
The liquid will remain if the trench is higher than the surface, does not connect to the pit, or the outlet is not low enough. Dig the trench deeper or reopen its connection.
What to check if tar remains after draining
| Symptom | Possible cause | Next check |
|---|---|---|
| Liquid level does not change | Trench is not connected or outlet is too high | Check the connection and trench-bottom height |
| Flow stops even after digging low | Outlet or remaining depression may not be at a suitable height | Do not force your way to the bottom; inspect the route from outside. Choose another pit if you cannot make a safe outlet |
| Cannot find the deposits | Tar remains at the rim or nearby | Check low ground and small depressions around the outside |
| Movement slows | Tarred effect or Growth attack | Move away from the liquid and deal with the enemy |
| Growth appears again | A player report describes a respawn example | Mark the area on your map as a possible return point |
A 2024 player report describes Growth reappearing after draining and a case where nearby low ground prevented complete drainage. This does not guarantee the same respawn cycle in every current environment, nor that collected tar will be replenished in the same amount. Check the route from outside and collect only what you can reach safely.
Uses for tar and where to collect next
Tar is a material used for Darkwood building and other purposes. Once you have the amount you need in your inventory, you can consider that trip complete and take it home. Completely removing the liquid is not required to collect the material. Mark the pit on your map so you can return when needed. Enemies and terrain may differ on your next visit, so check from the rim again.
The Plains materials and processing guide (Japanese only) covers how to prepare for gathering more Plains materials.
Sources and references
Questions and contributions
Share questions, corrections or play reports. Only approved posts for this article and language appear here.
Submit for review
Do not include personal details, passwords or private information about others. Text only. Publication and replies are not guaranteed.