A cart for carrying ore or wood is both a large-capacity storage container and a tool that you pull yourself. Before you load it and discover that it cannot climb a steep slope, check the route and controls while the cart is empty.
This guide covers PC 1.0 series, standard settings, and no mods. It focuses on the first overland haul; it does not assume you can load the cart onto a ship or transport it by dropping it off a cliff. In the build menu, look for the current cart name, Cart.
Turn bronze into nails, then build the cart
The cart itself requires 20 Wood and 10 Bronze Nails. It does not require 10 Bronze. A Forge can make 20 Bronze Nails from 1 Bronze, enough for one cart in a single craft.
| What to prepare | Quantity and use |
|---|---|
| Wood | 20 for the cart itself |
| Bronze Nails | 10 for the cart itself |
| Hammer | Place the cart from the build menu |
| Workbench | Provide a buildable area |
| Forge | Make nails from bronze |
If you have not made bronze yet, start with smelting copper and tin and using the Forge. Materials to build a new Workbench or Forge are separate from the cart materials in the table above.
- At a Forge, craft 20 Bronze Nails from 1 Bronze.
- Carry 20 Wood and 10 Nails to a flat spot with a Workbench.
- Equip the Hammer and select Cart in the build menu.
- Place it with room in front of the wheels and handles.
- Before loading cargo, test walking while pulling it and unhitching.
A cart may roll if placed on a slope. Keep the first placement and unloading areas as level as possible.
Use separate controls to open storage and pull the cart
To move cargo, aim at the cart's storage and open it. To pull the cart, stand between the handles and aim toward them until the prompt to use the cart appears. The target changes depending on where you aim, even on the same cart.
The default use key on PC is E. If you changed your key bindings, follow the on-screen use prompt.
- Go to the handles of an empty cart and stand between them.
- Use it when the prompt to use the cart appears, rather than the prompt to open storage.
- Walk forward a short distance and check that the cart follows.
- Stop on flat ground and use the cart again when its prompt appears to unhitch.
- Put a small amount of material in storage and travel the same short route in both directions.
You do not need to destroy the cart if you cannot unhitch. Stop, then aim again at the use prompt on the handle side rather than at storage. When you rush, your view may be pointed at the storage, so the intended action may not be selected.
Make a return route before loading the cart
The weight of cargo affects how easily the cart moves. A slope you could climb with an empty cart may not be manageable on the return trip with ore loaded.
Walk the route between your base and the mining site first, and check for rocks, fallen trees, narrow gaps, and steep slopes. Try a wider, gentler route even if it is somewhat longer. A gap that you can walk through alone may still be too narrow for the cart's wheels.
| Route condition | What to do before hauling |
|---|---|
| Rocks or fallen trees block the wheels | Clear the obstacle or choose a route around it |
| A steep uphill stretch | Reduce the load or take a gentler route |
| Difficult to control on a descent | Reassess the load and slope; avoid cliff edges |
| Narrow entrance to the base | Make room for the cart and turning clearance |
| Many enemies along the route | Check the area in daylight and secure an escape route before loading |
Do not load all your ore at once. First carry a small amount and confirm that you can make it back. Decide whether to load more or make several trips based on what you were actually able to move on the return route.
If it will not move, check the connection, obstacles, then weight
- If you move but the cart does not, check whether you are hitched to it.
- If hitched, check whether a wheel or handle is blocked by a rock, ledge, or building.
- If there is room but it cannot climb a slope, move some cargo to safe storage.
- With a lighter load, return to level ground and change the route.
- If the cart is damaged, use the Hammer's repair action within Workbench range and check its durability.
The cart itself can break, so stop and fix the route instead of forcing it against a rock. To repair it, use the Hammer on the placed cart; this is not the tool-repair button at the Forge.
Unload the cart when you arrive
Unhitch the cart on level ground at your destination and move materials from its storage into base chests or processing stations. Park it where it will not block the next route, then check its durability and any remaining cargo.
For a sea crossing, switch to transporting metal by ship and unloading it. Separate the cart leg from the ship leg; completing short hauls from the mine to shore and from shore to base first makes it easier to keep track of where materials are stored.
If uneven ground remains, use the Hoe to level ground, raise it, and use Shift to repair the route. Keep your feet in a stable position and start with a small area so the ground reference does not shift.
Sources and references
Questions and contributions
Share questions, corrections or play reports. Only approved posts for this article and language appear here.
Submit for review
Do not include personal details, passwords or private information about others. Text only. Publication and replies are not guaranteed.