Unlock and build
Scope: PC release 1.2, standard power settings, no mods. Console controls are not covered. Complete the Priority Power Switch node in the MAM Caterium research tree; the ordinary Power Switch unlock alone is not enough. Check prerequisite research and the node’s delivery requirements.
One switch costs 2 High-Speed Connectors, 6 Steel Beams and 50 Quickwire. Research deliveries and wiring are separate costs.
Assign priorities before a shortage
Undefined switches disconnect first, followed by groups 8 toward 1 until power stabilizes. Group 8 is not the most protected group.
- Identify the water and fuel equipment keeping generation running.
- Put optional production on separate circuits with priority switches at their boundaries.
- Name each switch after its area, such as generator water supply or reserve parts.
- Assign essential areas toward 1 and expendable areas toward 8.
- Check for Undefined switches and wiring that bypasses the boundary.
Protecting water supply while shedding a spare-parts factory is a proposed layout, not a guarantee of uninterrupted power. Even the remaining essential loads can exceed generation.
Restore circuits remotely
Any Priority Power Switch interface can remotely toggle other Priority Power Switches. This does not give every ordinary switch remote control.
- Identify disconnected areas and compare supply with consumption.
- Correct missing fuel, stopped water supply or excess demand.
- Reconnect needed areas one at a time and watch the load.
- If storage is connected, check whether its charge is still falling.
Reconnecting everything before fixing the cause can recreate the shortage. Do not assume automatic shedding also means recovery is complete; inspect connection states.
Troubleshooting
| Symptom | Check |
|---|---|
| Essential area disconnects first | Undefined assignment or reversed 1/8 priorities |
| OFF area stays powered | Another cable or route across the boundary |
| Repeated trips | Generator-support equipment was shed, or remaining demand is too high |
| Remote list is confusing | Give areas distinct names; distinguish ordinary switches |
A/B wiring and bypasses · Storage and continuing deficits
Sources and references
Questions and contributions
Submissions are currently paused. You cannot enter or send a post until reception resumes.