Requirements
This guide covers PC stable 1.6 with Biotech, not console, mods or the 1.7 unstable branch. The pump needs Electricity research, 75 steel, one component and Construction 3. It uses 200 W.
From placement to hauling
- Identify polluted ground and the area you want to protect. Toxic fallout is a separate problem.
- Check the placement overlay. The documented radius is 10.9 tiles, not the whole map.
- Connect power, verify operation and allow time for nearby ground to change.
- Provide storage that accepts wastepacks and an accessible hauling route.
- Inspect stored packs too. Unfrozen waste deteriorates and releases pollution; consider refrigerated storage for a long-term stockpile.
Diagnose the symptom
| Symptom | Check |
|---|---|
| Pump inactive | Connection, switch and power supply |
| Desired ground unchanged | Whether it lies inside the displayed range |
| Clean ground polluted again | Deteriorating packs or another pollution source |
| Packs remain nearby | Storage acceptance, haulers and access |
Moving packs next to the pump does not finish waste management. Inspect the cleaning area and storage area separately. Before adding pumps, locate the remaining pollution and examine the packs; otherwise you may keep collecting pollution that storage releases again.
Separate other problems
Mech rechargers charge mechs; this pump does not charge or repair them. Roofed routes during toxic fallout (Japanese) address a different hazard.
This is a source-based guide using official descriptions and the community wiki, not an in-game test. It does not claim a measured completion time, cleanup order or a verified shutdown rule when packs remain.
Sources and references
Questions and contributions
Submissions are currently paused. You cannot enter or send a post until reception resumes.