Scope, cost and risk

PC 1.6, base game without DLC or mods. After Electricity research, choose Hidden conduit in the Architect Power category. Each tile costs 2 Steel instead of 1 for ordinary conduit and takes longer to build. Reserve 20 Steel for a new 10-tile route.

Hidden conduit cannot randomly short circuit. Leaving powered ordinary conduit elsewhere does not remove that source of risk. Rain or snow affecting batteries and other appliances, generation shortages and solar flares are separate problems. Ordinary conduit itself does not short circuit simply because it is raining.

Six steps to switch routes

  1. Identify critical appliances and the current grid. Check refrigeration, medical equipment and defenses and trace generators and batteries. See battery connections to separate connectivity from insufficient generation.
  2. Choose a separate route. This example builds through free cells beside the existing route. Power transporters must connect directly; an appliance's remote connection range cannot bridge gaps between conduits.
  3. Finish the hidden conduit. Check research, 2 Steel per tile and Construct workers. Blueprints are not finished conductors. Unsmoothed mountain rock and ore cannot simply have conduit routed through them.
  4. Check each appliance's connection and operation. Appliances can attach up to 6 tiles from a power transporter; conduits follow the direct-contact rule. Use Reconnect if needed and inspect the actual connection and operation. A displayed connection does not prove enough power is available.
  5. Deconstruct old ordinary wire in sections. Only start after the new route is finished. Check critical appliances after each section. If something stops, halt removal and fix gaps or connections. Do not budget for recovered Steel from deconstruction.
  6. Review remaining ordinary wire and roofs. Include other powered grids when looking for ordinary conduit left behind. Check roofs over batteries and actual generation and storage before finishing.

Invisible or disconnected?

Hidden conduit is invisible on the ground after completion: inspect construction state and power connections. For a stopped appliance, check unfinished sections, gaps, its attachment and the source's supply and load. Do not confuse the 6-tile appliance link with conduit-to-conduit contact.

If incidents continue, inspect ordinary conduit still present, exposed appliances and the notification. Both conduit types share a layer. Counting overlapping plans as two live routes is unsafe; this guide uses a separate free-cell route rather than assuming a direct replacement command.

Removal and limits

Conduit cannot be uninstalled and reused elsewhere. Deconstruction returns no materials, so relocation needs new Steel and work. Hidden conduit can still be lost through an overhead mountain collapse or destruction of a bridge supporting it.

Reducing random short circuits is not a guarantee against every fire. For a power-stop notification see solar-flare priorities; for remaining flames use firefighting and Home area.

Sources and references

Questions and contributions

Submissions are currently paused. You cannot enter or send a post until reception resumes.

Posting rules and data storage