Equipment and scope of this workflow

PC stable 1.6, Biotech required, no mods; not unstable 1.7 or real-world medical advice. This workflow makes an ordinary, non-archite xenogerm and checks the item, rather than implanting it.

Gene extraction covers extraction and storage. Here, combine packs already obtained through extraction or trade and loaded into banks. Assembly does not consume those packs, so they can support another combination later.

Equipment or limitPreparation and role
Gene assemblerXenogenetics research, Construction 4; 200 steel and 4 components; 2×3 tiles, 100 W.
Gene bankLoad and power a bank connected to the assembler. Each uses 40 W and stores 4 packs, not 4 genes. Floor and ordinary shelf packs are unavailable.
Complexity and metabolismBase complexity limit 6; metabolic efficiency must be at least −5. Complexity capacity and food-use constraints are different.
Gene processorIts research and Construction 6; 100 steel, 25 plasteel, 2 components. A powered, connected processor uses 50 W and adds 2 complexity capacity.

From stored packs to a finished xenogerm

  1. Research Xenogenetics, build and power the assembler. Leave the interaction spot accessible and place stocked, powered banks nearby in the same room. Check connection indicators and bank contents.
  2. Select the assembler and open its xenogerm recombination screen. Check the desired genes appear. If missing, inspect loading, connection and power before extracting more packs.
  3. Read the entire resulting gene list, including drawbacks and metabolic efficiency. For a first test, omit archite genes and choose a small combination within complexity 6.
  4. A complexity-8 plan can use one powered, connected processor to reach capacity 8. But if metabolic efficiency is below −5, another processor will not solve it. Remove genes or choose a combination that balances metabolism.
  5. Check the name and final contents, start recombination, then check a research-capable colonist’s work settings, allowed area and route. Observe actual progress; inspect power to the assembler and support equipment separately if it stops.
  6. Select the xenogerm dropped nearby when finished and verify the intended combination. Check the source packs remain in their banks. Creation alone does not implant anyone. Implantation overwrites existing xenogenes and is a separate action, not performed in this workflow.

Missing genes or stopped recombination

StateCheck
Packs exist but genes are unavailableThe specific packs must be inside connected banks, not on floors, shelves or in a distant room.
Equipment seems connected but failsUse close placement in one room; check connection indicators, obstructing walls and power to each building.
Insufficient complexityBase 6 plus 2 per powered, connected processor.
Still an invalid combinationRead metabolism and screen warnings. More complexity does not change metabolic constraints.
Recombination stops partwayWork and access, plus a processor outage dropping capacity below the plan’s requirement.

Reduce the plan before adding complexity

For example, a complexity-8 plan with one assembler (100 W), one bank (40 W) and one processor (50 W) uses 190 W for those buildings. Generation and reserve capacity are separate. Do not switch off the processor while relying on it: recombination pauses if capacity drops below the requirement. Consider fewer selected genes before expanding equipment.

Archite genes involve additional research and capsules; do not treat them as the same resource-free ordinary example. Completion time depends on complexity and the worker, not a fixed deadline. See hauling settings (Japanese) and work priorities for basic access and assignments.

Sources and references

Questions and contributions

Submissions are currently paused. You cannot enter or send a post until reception resumes.

Posting rules and data storage