This covers the PC 1.6 base game without DLC or mods. The procedure was checked against sources, not tested in game. It concerns preparing land for construction, not water collection or irrigation.

Choose the site before building

RequirementFor one pumpWhat to check
ResearchMoisture pumpHas it been researched?
Steel75Stock available for construction
Components4Keep separate from other construction needs
Construction skillAt least 6Assigned builder
Power consumption150 WSpare capacity on the connected grid
Footprint1×1 tilePosition relative to the target terrain

If research is missing, check the research project and researcher. A completed pump cannot be uninstalled and reinstalled. Relocation requires deconstruction and new construction, so choose the land to dry first.

Check the terrain type

Mud, marsh and marshy soil become soil; soft sand becomes sand. Shallow water and shallow ocean water normally become stony soil. In the sea ice biome, shallow water instead becomes ice, so do not assume all dried land becomes farmland.

Deep water and moving water are excluded. More pumps or a longer wait cannot change unsupported terrain through the same method. Check the tile's terrain name rather than judging only its watery appearance.

  1. Check the terrain name of the tile you want to change.
  2. Confirm it is neither deep nor moving water.
  3. Build where the target lies within the device's maximum range.
  4. Supply 150 W and check the device status and range display.
  5. After time passes, check whether the required tiles have changed.

A pump can be placed on a bridge and change the terrain underneath. However, remove the bridge before placing heavy buildings. Changed terrain beneath a remaining bridge does not yet provide a layout using the new ground.

Wait for the inner radius to expand

With power, the installation tile changes immediately and the effect slowly spreads outward. Maximum radius is 6.9 tiles, and processing the whole area takes one in-game year, or 60 days. Expansion by one tile of radius takes roughly 8.7 days.

The inner circle shows the processed area; the outer circle shows maximum range. Being inside the outer circle does not mean every tile is dry. If a room is needed urgently, consider other usable land while waiting.

Terrain changes remain after removing the pump. However, even after processing its maximum range, it keeps consuming 150 W. When finished, verify the required tiles have changed, then disconnect power or deconstruct it. The pump itself has no manual on/off control.

When progress seems absent

SymptomWhat to checkNext action
Cannot buildResearch, 75 steel, 4 components, Construction 6Meet construction requirements
Surroundings do not dry immediatelyInner and outer circlesConfirm power and allow time
Water remainsDeep or moving water?Recheck eligible terrain
Heavy objects cannot be placed after dryingIs a bridge still present?Check changed terrain and remove the bridge
Power use continues after completionIs the maximum area processed?Disconnect or deconstruct

If power is missing, return to checking generation and connections (Japanese article). For farming, inspect the resulting terrain before setting a growing zone and work assignments.

Sources and references

Questions and contributions

Share questions, corrections or play reports. Only approved posts for this article and language appear here.

Submit for review

Do not include personal details, passwords or private information about others. Text only. Publication and replies are not guaranteed.