An anvil takes 3 iron blocks and 4 iron ingots to craft, for 31 iron total. Separate renaming from operations that consume tools, materials, or books, and check the result and experience-level cost before collecting it!
Specific costs and input conditions were cross-checked against the official distribution behavior for normal Survival in Java Edition 26.3 without mods or data packs. Bedrock Edition coverage is limited to official general guidance and a fixed-commit recipe; Java’s cost limit is not applied to every platform. Device-specific controls and in-game reproduction have not been tested.
Set aside iron for the anvil and for repairs separately
| Purpose | Prepare | Check |
|---|---|---|
| 1 anvil | 3 iron blocks and 4 iron ingots | 31 iron total, including the blocks |
| Repair an iron pickaxe with materials | A damaged pickaxe and extra iron ingots | Keep separate from the 31 iron for the anvil |
| Anvil operations | The experience levels needed for the operation | Compare your current level with the cost shown in the result slot |
At a crafting table, put 3 iron blocks across the top row, an iron ingot in the center of the middle row, and iron ingots across the bottom row. The total is 3 × 9 + 4 = 31 iron. If you are short on iron, see preparing for underground mining. Anvils fall if there is no supporting block underneath, so place one where it has support.
Choose the left and right inputs for your goal
| Goal | Left input / right input | What is used when you take the result | What to check in the result |
|---|---|---|---|
| Change only the name | Target item / leave the right slot empty; edit the name field | The displayed experience levels; no repair material | The name changes while durability and effects stay the same |
| Repair with materials | Damaged iron pickaxe / iron ingots | The required iron and displayed levels | Durability is restored and desired effects remain |
| Combine tools of the same type | Tool to keep / another tool of the same type | The right-side tool and displayed levels | Durability and the enchantments that actually remain |
| Apply an enchanted book | Target tool / enchanted book | The book and displayed levels | The target receives effects that can be applied to it |
Different tools, such as a wooden pickaxe and an iron pickaxe, cannot be combined as matching tools. Not every effect transfers when combining tools or applying a book: some cannot apply to the target or conflict with existing effects. Even if a book has several effects, do not assume they all transfer; read the result description. Before using up an item with effects you want to keep, check which side it is on.
For example, to change only the name of a damaged iron pickaxe, leave the right slot empty and edit the name. To repair it too, put iron in the right slot. The first operation changes the name; the second also changes durability and consumes material. This is an example for checking the inputs, not a promise of a fixed minimum cost.
Six steps to repair an iron pickaxe with materials
- Return before the tool breaks completely. Bring a damaged iron pickaxe, extra iron, and enough experience levels.
- Craft and place the anvil. Set it where a block supports it from below.
- Insert the tool and material. Put the pickaxe on the left and iron ingots on the right.
- Check the repair result. In Java 26.3, each material can restore up to about 25% of maximum durability, without exceeding full durability. The amount needed depends on how damaged the tool is, so inspect the result.
- Change the name if needed. Edit the name field and review the repaired durability, effects, and name. For renaming only, leave the right slot empty.
- Check the displayed cost before collecting the result. Take it only if you have enough levels and materials and the result is what you intended.
This is an editorially suggested check sequence. Even with spare materials, material repair will not produce a result for a tool that is already at full durability. If there is no repair result, use the checklist below instead of immediately spending other materials to test it.
Separate renaming from increases to prior-work history
In Java 26.3, renaming alone with the right slot empty does not increase the prior-work history value. However, prior work history can affect the displayed cost of the current operation. Do not treat renaming as always having the same fixed cost, or assume that each rename by itself increases the history value.
Material repairs, combining tools, and applying books update work history and may make a later operation cost more. Renaming together with a repair is also different from a rename-only operation. Replacing the anvil does not erase work history stored on the item.
In normal Survival in Java 26.3, repair and combination operations costing 40 levels or more cannot be collected. This is separate from simply lacking enough levels; gaining more experience alone will not fix it. Rename-only operations follow a separate branch, so do not apply this limit to them automatically. This guide does not guarantee Bedrock cost limits or the cheapest combination order for every enchantment.
If a repair does not work or the cost is high
| Situation | What to check next |
|---|---|
| No material-repair result appears | Is the material compatible? An iron pickaxe uses iron. Is it already at full durability? |
| Materials are consumed when you only want to rename | Is there a material, tool, or book in the right slot? Leave it empty to rename only. |
| Tools cannot be combined | Are they exactly the same type? Wooden and iron pickaxes cannot be combined. |
| A book’s effect is missing or only partly applied | Check the item’s eligibility and conflicts with existing effects. Read which effects remain on the result. |
| You do not have enough levels | Compare your current level with the displayed cost. Keep this separate from Java’s high-cost limit. |
| The cost is higher than before or too high to collect | Check the operation type and prior work history on the tool or book. Do not repeat unnecessary operations. |
| The anvil is damaged or disappeared | Using it can damage the anvil itself. Anvils cannot be repaired. |
For applying books, see how to use enchanted books. To repair a tool with experience orbs, see how to use Mending. Picking up experience orbs while holding a tool with Mending is different from working on it with an anvil.
To remove unwanted enchantments, see effects removed by a grindstone, combining durability, and checking curses. To name an animal, see prepare a Name Tag, name it with an anvil, and use it on a target; check that guide’s version and conditions. No fixed number of anvil uses without damage is guaranteed.
Sources and references
Questions and contributions
Share questions, corrections or play reports. Only approved posts for this article and language appear here.
Submit for review
Do not include personal details, passwords or private information about others. Text only. Publication and replies are not guaranteed.