Use a Splitter’s “output priority” to send Iron Plates to research first and send only the surplus to a parts line. Use a “filter” when you want to separate mixed Iron Plates and Copper Plates. Start with one goal and check the flow through a single Splitter.

Scope: PC version 2.0.77 base game, without Space Age, Quality, or mods. Materials and research were checked against developer data for 2.0.77; the meaning of settings was compared with developer explanations and the Official Wiki. Placement and throughput were not tested in-game.

Research and materials for one Splitter

After researching Automation science pack, research Logistics to craft a yellow Splitter. The standard Logistics research cost is 20 red science packs at 15 seconds per unit. The actual completion time depends on the number of Labs and available power.

MaterialsFor 1 SplitterUse
Electronic Circuits5Crafting the Splitter
Iron Plates5Crafting the Splitter
Transport Belts4Consumed to craft the Splitter
Yellow Belts to connect itAdditional, as neededStart with one input and two outputs

Count the four Belts consumed by the Splitter separately from the Belts placed on the ground. Choose an active output from moving Iron Plates from the furnaces and add another destination.

Use output priority to fill a needed line first

For this example, feed only Iron Plates and leave the filter empty. Starting with no input priority also makes the effect of output priority easier to see. This is a test layout:

  1. Place the Splitter in the Iron Plate Belt, oriented with the direction of travel.
  2. Connect one output to a research-parts line and the other to a reserve line. Inserters are needed where items enter machines.
  3. Open the Splitter and set output priority to the side connected to research. Do not confuse this with input priority.
  4. Leave room at both destinations and watch whether Iron Plates go to research first.
  5. When research stops consuming items and its Belt backs up, check whether items go to the other side. If both are full, clear space downstream.

Output priority sends items to the selected side while that side can accept them; when it is full, items go to the other side. If research is consuming everything continuously, the reserve side may receive nothing. If you want to split items evenly in that situation, remove the priority.

Choose input priority or a filter for the intended purpose

GoalSettingFirst check
Supply Iron Plates to research firstOutput priorityDestination connected to the selected output
Use ore from an older mine firstInput priorityInput connected to the older mine
Separate mixed Iron and Copper PlatesOutput filterOutput for the selected item and the other output
Divide flow between two outputsNo priority or filterCan both outputs accept items?

Input priority takes items from the selected input first, and uses the other input only when that one has no items. It does not prioritize an output destination.

When you set Iron Plates as the filter, the left/right output selection becomes the side that receives Iron Plates. Iron Plates go to the selected side; Copper Plates and other items go to the opposite side. If the selected side is blocked, Iron Plates do not overflow to the Copper side. Make sure both outputs have somewhere to send their items.

Checks when items stop or favor one side

Open the Splitter to verify its settings, then follow the downstream path from the output where items stop. If using a filter, first check that the selected item matches the intended left or right output. If a destination Chest or Assembling Machine is full, clear it before adding more Splitters.

If only one lane is being used on the input and outputs, do not expect a Splitter to swap the left and right Belt lanes. The Splitter preserves item lanes. Check the branch of the Belt and its two internal lanes separately.

A yellow Splitter inserted into a faster Belt line limits transport at that point. Match connected Belt speeds, then distinguish a supply shortage from a downstream blockage. Also see smelting throughput and the one-lane limit. The next step for delivering ingredients to research is automating green science.

These checks are an editorially suggested order. Circuit connections and large balancing systems are outside scope; this guide focuses on checking the settings and destinations for one Splitter.

Sources and references

Questions and contributions

Share questions, corrections or play reports. Only approved posts for this article and language appear here.

Submit for review

Do not include personal details, passwords or private information about others. Text only. Publication and replies are not guaranteed.