A Constant Combinator continuously sends the signals and counts you set to a circuit network. Connect it to a receiver with red wire, and manually switch its output on or off in its settings. If a value is off, check whether the same signal is also coming from another chest or from red or green wire.

This guide covers PC 2.0.77, the base game, normal quality, and no mods. The values are examples for testing how the system works.

Send a signal from a Constant Combinator to a lamp

For example, send one A signal to turn on a lamp. Circuit wire and copper power wire are separate connections.

  1. Place a Constant Combinator and a lamp. Power the lamp with an electric pole as well.
  2. Open the Constant Combinator. In the output list, choose A in the signal field and set its count to 1.
  3. Select red wire, then left-click the Constant Combinator and lamp to connect them. Red wire can be selected with Alt+R or from the shortcut bar.
  4. Open the lamp and set its Circuit condition to “A > 0.”
  5. Once it lights, open the Constant Combinator, disable its circuit output, and check whether the lamp turns off.

Here the Constant Combinator sends “A signal = 1.” That is not a measurement showing that one unit of a product exists in your inventory. To check chest stock, the chest must send its contents as a signal.

Check on and off with a single unit

This comparison assumes that no other signal source is connected and that the powered lamp's condition stays at A > 0. Test toggling output and changing the count separately on a lamp set to receive circuit signals.

Constant Combinator stateSet A toExpected lamp state
Output on1Lit
Output on0Off
Output off1Off

If the lamp stays lit after the test, check whether A is also coming from another Constant Combinator or a green wire. Output off stops that Constant Combinator from transmitting; it does not stop the entire circuit network. If power is insufficient, the lamp will not light even when the A condition is correct.

Toggle between transmitting and stopped

A configured Constant Combinator continuously outputs its signals. Edit the value of a signal row or use the whole-combinator output toggle in its settings. When the device output is off, its signals do not reach connected receivers.

A Constant Combinator alone cannot automatically turn its output on or off based on circuit conditions. To compare received signals and output according to a condition, use a Decider Combinator. Manual shutoff and condition-based output are different operations.

A Constant Combinator does not need power. However, receivers such as lamps and Programmable Speakers need power to operate.

Check why signal values increase

If a Constant Combinator sends 50 Iron plates and a chest sends 30, a device receiving the same circuit network gets Iron plate = 80. A circuit network adds together signals of the same type. It does not combine different signal types, such as Copper plate and A, into one total.

Red and green wires spread into separate networks, but if a receiving device is connected to both, it sums the same signal type at the receiver. For example, a lamp receiving 50 Iron plates from a Constant Combinator over red wire and 30 Iron plates from a chest over green wire sees 80 Iron plates.

Value seenCommon causeCheck
Expected 50, got 80Another source, such as a chest, sends 30 of the same signalTrace the sources connected to the network
Expected 50, got 100The same signal is received on both red and green wireCheck wire colors connected to the receiver
Only another item count increasesAnother source on the network sends the same item signalCheck that signal and its sources individually
No value appearsConstant Combinator output is off, it is not connected, or no signal is configuredCheck its settings and circuit icon

If the 2.0 settings screen is confusing

Since 2.0.7, Constant Combinators also support settings that use logistic groups. When linked to a group, do not confuse the group's requested amount with the count actually output by the Constant Combinator. According to the official Wiki, a Constant Combinator using a logistic group outputs the minimum requested amounts.

Also, seeing an input condition at a device that receives signals does not by itself confirm that the value is what you expect. Devices connected by the same wire color share signals. If more chests or Constant Combinators send the same signal, the receiver's value changes. Start with one Constant Combinator, one red wire, and one receiver, then add only the sources you need one at a time.

If you want to stop an inserter based on stock, see how to stop an inserter using chest stock. A Constant Combinator sends a specified value; it does not measure stock.

Sources and references

Questions and contributions

Share questions, corrections or play reports. Only approved posts for this article and language appear here.

Submit for review

Do not include personal details, passwords or private information about others. Text only. Publication and replies are not guaranteed.