Books and materials after the story

This is a basic Isle of Awakening build for the PS4 retail game after the main story. It is not Minecraft redstone wiring and does not require DLC parts. Other platforms’ buttons and latest patch numbers are not treated as identical.

From the mountain summit, descend east toward the vine-covered wall on the route to the Hairy Hermit’s temple. Break through to the hidden room and press its red entrance button. Read all three green, red and blue books to learn the magnet recipes; collecting books as furniture is not enough.

Magnetite comes from ヤミヤミ島, the post-story Explorer’s Shore unlocked with 3,000 Builder’s Hearts. Knowing a recipe does not supply ore. The floor switch recipe is learned during the Moonbrooke story.

ComponentMaterial and role
マグネブロック, the movable magnet block2 iron ingots; the part that moves
ひっぱりマグネ・横, horizontal pulling magnet2 magnetite; pulls the block horizontally
床スイッチ, floor switch2 iron ingots and 1 oil; step on it to activate nearby devices

The table lists inputs per craft; check the bench for its batch output.

Use a compatible bench such as the Isle of Awakening workbench. Distinguish missing materials, unlearned recipes and the wrong bench.

Start with one direction and one block

  1. Place one undisguised magnet block on an open, flat site. Do not begin with a huge wall or multi-floor lift.
  2. Put the horizontal pulling magnet on the same height and straight axis, facing the block. Start close and clear ordinary blocks from the route and destination.
  3. Place a floor switch immediately beside the magnet. Think in stages: switch activates magnet, then magnet moves block.
  4. Step on the switch and watch whether the block moves toward the magnet. If not, check facing, height, straight alignment and obstructions individually before adding components.
  5. Returning movement needs another device, such as a repelling magnet, and its activation path. One pulling arrangement is not an automatic round trip.

Check movement before integrating a passage. Room recognition is a separate issue.

Diagnose remote operation

Floor and wall switches affect nearby devices. A remote switch reaches up to 15 squares along its arrow. Match horizontal/up/down type and axis: an offset can miss the target. Another switch between them can stop activation beyond it. Switch-to-magnet distance is different from magnet-to-block distance.

SymptomFirst check
Ordinary stone does not moveIs the moving piece actually a magnet block?
Local operation works, remote does notDirection, 15-square reach, axis and intervening switches
Placing a magnet does nothingStep on its switch and check that activation reaches it
Moves out but not backAdd the return device and its own activation path

Appearance is not furniture value

Place the magnet block, select the desired appearance item in the item bar and use the camouflage prompt nearby; the documented PS4 button is triangle. Do not copy that button to another platform.

Camouflage changes appearance, not the actual valuable furniture or its fanciness. After residents build from a blueprint (Japanese), inspect the placed magnet blocks yourself; blueprint construction does not establish that camouflage was reproduced.

Sources and references

Questions and contributions

Submissions are currently paused. You cannot enter or send a post until reception resumes.

Posting rules and data storage