Materials and input selection
PC 1.3, normal settings, no mods. Source-based instructions, not a measured test of every item or processing time.
Craft the Shredder at the Advanced Automation Table with 8 Octarine Bars, 20 Iron Bars and 2 Mechanical Parts. The table itself comes from the Octarine Workbench and costs 20 Octarine Bars plus 15 Scarlet Bars. These are separate costs.
Feed only tools, equipment or other accepted items you want to discard. Do not assume every item is supported or all original crafting materials are refunded. Start with one unwanted item and check the result.
Check processing and collection
- Put useful tools, equipment and spares into separate storage. Do not connect a shared valuables chest as the input.
- Place the machine, check its output arrow and leave a collection area.
- Supply electricity and feed a small amount of unwanted items. Processing consumes them and produces applicable materials or Scrap Parts.
- Collect the output on the arrow side. A neighboring chest does not provide automatic storage.
- After checking manual operation, add a Robot Arm if needed. Do not connect a supply containing items you want to keep.
Scrapping is not an undoable repair operation. To keep using worn equipment, use the Salvage and Repair Station for repair instead.
No processing or apparently missing materials
| Symptom | Check |
|---|---|
| Recipe missing | Advanced, not ordinary, Automation Table |
| Processing stopped | Power, accepted input and actual supply |
| Chest receives nothing | Output direction and separate collection |
| Fewer materials than expected | No assumption of a full refund |
| Wanted to keep the equipment | Review future inputs and stop that supply |
This guide does not restore lost equipment or list every salvage yield. Distinguish the Shredder from disposal in an Incinerator, and test input and collection with a small amount first.
Sources and references
Questions and contributions
Submissions are currently paused. You cannot enter or send a post until reception resumes.