For PC version 1.0, standard settings, and no mods. This guide focuses on repairing an early wooden base. First distinguish what happened, including damage caused by enemies.
Separate “cannot place,” “collapses,” and “is damaged”
| What is happening | First condition to check |
|---|---|
| The building piece cannot be placed at all | Materials, the range of the required station, and anything obstructing placement |
| It was placed once, then collapsed | Support from the ground and the support provided by connected pieces |
| The piece remains, but its durability has fallen | Damage from rain or enemy attacks |
| Nearby pieces collapsed after one was removed | Whether the removed piece had been supporting other pieces |
Adding workbenches does not increase support for a floor that extends too far into open air. Conversely, adding posts alone does not solve a missing workbench-range requirement.
If you cannot use the workbench, continue to Check the roof or cover and workbench level.
Check the support colors from bottom to top with a hammer
Equip a hammer and aim at a building piece to see its support state by color. Do not confuse these colors with an indicator of the percentage of durability remaining.
| Color | How to read it |
|---|---|
| Blue | Treated as a strong foundation, for example through a connection to the ground |
| Green | Well supported |
| Yellow or orange | Support is getting weaker |
| Red | Little capacity remains for extending the structure |
Not every red piece breaks immediately. If pieces added beyond an existing red piece collapse, review the support path instead of only repairing the original piece.
- Look at the pieces still standing next to the collapsed area.
- Aim in turn at the walls or posts below them.
- Trace the connections down to a foundation that touches the ground.
- Find where the color weakens as height or horizontal overhang increases.
- Consider whether a support post can be added from below near that point.
Do not judge by appearance alone just because something looks like a post; check its own support. A decorative beam attached to the roof does not automatically add support from the ground.
Run a post from the ground under the collapsing area
First stop working at height and move somewhere safe from falling. Starting below the area makes it easier to check which post actually touches the ground.
- Go below the collapsed roof or floor and choose a place for a post.
- Place a post that touches the ground and check that its color shows it is treated as a foundation.
- Connect posts upward until they reach the piece you want to support.
- Check whether the original roof or floor has improved in color.
- Place just one of the collapsed pieces and see whether it stays.
- Continue building gradually from the area that holds.
If the color and result do not change, check the connections between the post and the ground, and between the post and the piece above. Before adding another post, make sure the support you just placed is not interrupted partway up.
If it still does not reach, consider shortening the overhang, lowering the roof, or adding more support points. If you have progressed far enough, core wood posts are another option, but not all building materials can reach the same height.
For a move to stone, see Build a stonecutter and your first stone wall. Stone does not remove the need for support, so keep checking the foundation.
For rain-damaged wood, check repairs and roofing instead of rebuilding support
An uncovered outdoor Wood floor 2x2 loses durability to rain until it reaches half. Rain alone does not reduce durability to 0; that is separate from a collapse caused by insufficient support.
If the piece remains but is damaged, use the hammer's repair action within the range of the appropriate station. Ordinary building repairs require no extra materials. Make sure you selected repair, not replace or dismantle.
To protect against rain, cover vulnerable pieces with a suitable roof. Also check Fire and ventilation at a resting place so you do not trap campfire smoke.
Even wood that only loses half its durability to rain can still break if enemies attack it further. Restoring durability and protecting against enemies are separate needs.
Check what a post supports before removing it
Even when removing a post to improve the appearance, first check the roof or floor above it. Losing support can affect more than the single post you removed.
Add another support and confirm that the pieces above are adequately supported; then remove posts one at a time. Removing several together makes it harder to tell which post was needed.
Dismantling may recover materials, but it does not automatically restore the previous arrangement. Check equipment under the roof and walking paths too, and repair while keeping the structure you need.
Sources and references
Questions and contributions
Share questions, corrections or play reports. Only approved posts for this article and language appear here.
Submit for review
Do not include personal details, passwords or private information about others. Text only. Publication and replies are not guaranteed.