To receive terrain and markers explored by another player, have them record their information at a Cartography Table, then read the map at that same table yourself. Do not assume sharing is complete just because the table is placed; check the sender and recipient steps separately.

This guide covers co-op play on PC in the 1.0 series, with the map enabled and no mods. To start, have two players use the same table in the same world and confirm one shared location.

Gather materials for one Cartography Table

Hold a Hammer and build a Cartography Table where you can use a Workbench. It takes five types of materials.

MaterialFor 1 table
Fine Wood10
Bone Fragments10
Bronze2
Leather Scraps5
Raspberries4

In the standard progression, you need to discover the materials and Workbench before the building option appears. If you cannot find it in the build menu, check whether you have picked up Bronze and whether you are holding a Hammer. For Bronze, see your first smelting and Bronze processing.

Leave enough room for both players to stand near the table and select it, with a clear floor and path around it. The materials table is only for the Cartography Table itself; it does not include the Workbench or building materials.

“Record discoveries” and “Read map” move information in different directions

The table has an action to record your discoveries and another to read the map stored at the table. In English, these are “Record discoveries” and “Read map.” Check the action labels shown in your interface before choosing.

ActionDirection of informationWho uses it
Record discoveriesYour map → tableThe player sharing exploration data
Read mapTable → your mapThe player receiving exploration data

If the sender only uses Read map, that does not record newly found locations. The recipient should also choose Read map, rather than ending after using Record discoveries.

Shared information includes explored terrain, map markers, and their names. For placing a marker on your own map, see adding, completing, and deleting markers.

For the first share, confirm it with one marker

  1. The sender opens their map and chooses one explored location to share.
  2. Prepare a marker at that location with a name that is easy to distinguish.
  3. The sender uses “Record discoveries” at the Cartography Table.
  4. The recipient uses “Read map” at the same table.
  5. The recipient opens their own map and compares the selected location and its name.
  6. To share in the opposite direction too, switch roles and repeat the recording and reading steps.

This one-at-a-time sequence is an editorial suggestion for distinguishing a missed recording from a missed read. Choosing one location to check makes the result easier to recognize than looking through many similarly named markers from the start.

When you return with new discoveries, record them at the table again and have your group read the map. Do not assume that placing the table or reading it once means you have received the latest update.

If information is missing, check the action order and location

SituationWhat to check next
The other player’s map did not change after placing the tableWhether the sender recorded discoveries and the recipient read the map
Newly explored places are missing after readingWhether the sender recorded discoveries after returning from exploration
The result is unclear when trying at another baseWhether you are using the same table used for the initial check
There are too many similar markers to find the right oneCompare the chosen location, direction, and marker name on both maps
Pressing a key does not perform the expected actionCurrent key bindings and whether the interface shows Record or Read

Receiving a marker does not guarantee that the location is safe or already cleared. Once you choose an expedition destination, arrange Rested status and a route home before setting out.

Sources and scope

Building materials, construction requirements, and Japanese item names were cross-checked against the unofficial database display for version 1.0.17 and Valheim.tools. The recording and reading mechanics are based on PC Gamer’s article dated September 16, 2021. The developer’s version 1.0.17 announcement (October 6, 2026) explains that releases can be delayed by platform; it is not evidence that every platform is on the same build. Operation on the latest live patch, no-map settings, mods, synchronization between multiple tables, and rules for deleting or overwriting shared markers have not been verified in-game.

Sources and references

Questions and contributions

Share questions, corrections or play reports. Only approved posts for this article and language appear here.

Submit for review

Do not include personal details, passwords or private information about others. Text only. Publication and replies are not guaranteed.