The Teleporter is a device that moves you to the other side when you connect two placed teleporters with wire and send a signal while standing on a pad. Placing them alone is not enough; you also need a way to activate the circuit at the destination to return. Start by building a round-trip circuit between two nearby, safe locations!
Scope: PC version 1.4.5 series, a normal world, no mods, and the default keyboard-and-mouse controls. This guide is cross-checked against community-edited wiki text; controls on a live game and other platforms have not been tested. It does not cover choosing destinations with three or more teleporters, transporting NPCs or enemies, or boss-fight circuits.
Get two teleporters and a lever for each end from the Mechanic
Current references say the Mechanic sells Teleporters. Older guides that say the Steampunker sells them predate the seller change in 1.4.4. If you cannot use her shop yet, start with Rescuing the Mechanic and your first wiring.
| Get | Role in this two-location circuit |
|---|---|
| 2 Teleporters | Place one at the departure point and one at the destination |
| 2 Levers | Place one at each end to activate the circuit manually |
| Red Wrench | Tool for placing red wire |
| Wire | Material for connecting both teleporters and both levers |
| Wire Cutter | Remove incorrect wiring or unwanted branches |
The amount of wire needed depends on the distance and route. Buying a wrench does not give you unlimited wire. Check the prices shown in the shop, and test the controls on a short circuit before buying materials for a distant destination.
Connect both teleporters and both levers with red wire
For your first test, use a flat area with little risk from enemies or falls. Call the departure point A and the destination B, and leave enough room to stand on both pads. This layout is a suggestion for easier checking, not a limit on distance or number of teleporters.
- Place Teleporter A and B some distance apart.
- Place a lever on a nearby floor or background wall where you can operate it while standing on A.
- Place another lever at B where you can operate it while standing on that pad.
- Keep Wire in your inventory and use the Red Wrench to run wire through the tiles occupied by Teleporters A and B.
- Run that same red wire through the tiles occupied by both levers.
- Keep the wrench equipped and follow the wire to check for gaps or a change to another wire color along the way.
Do not attach a lever to the side of a block; place it on the floor, a platform, or a background wall. If you cannot operate it without stepping off the pad, move the lever closer and try again.
Do not stop after running wire only to the side of a pad or lever; the wire must pass through the tile of each. For the first circuit, do not connect another teleporter, and keep it separate from wires for existing lights or traps. This makes it easier to narrow down why it does not work.
Activate the circuit on the pad and return from the destination
Where you stand when you activate the lever matters. Sending a signal from a distance without standing on a pad does not test whether it will transport you.
- Stand on Teleporter A.
- While standing on the pad, right-click the lever at A.
- Check that you moved to B and can move safely at the destination.
- Stand on Teleporter B and right-click the lever at B.
- Once you return to A, leave both levers and the wiring in place and finish the test.
Do not skip checking the return trip just because you were able to travel once. This is not a guide to choosing a destination based on lever direction. The setup here moves between two teleporters connected to the same wire.
A Teleporter is different from returning to your spawn point with a Magic Mirror. It does not automatically take you to the place where you last slept; it moves you to the other pad you connected yourself.
If you do not teleport or can travel only one way
| Situation | What to check and fix |
|---|---|
| No wire appears when you use the wrench | Check that you still have wire in your inventory |
| You can activate the lever, but you do not move | Stand on the pad and try again. Check that the wire passes through the tiles occupied by both the pad and lever |
| The wire is placed, but nothing happens | Check that the same color runs continuously from A to B and that there are no gaps |
| You can travel there but cannot return | Check that there is a lever at the destination and that it connects to the same circuit |
| You have to step off the pad to press the lever | Move the lever to a position you can operate while standing on the pad |
| Another device activates or the destination is unexpected | Check whether another device or a third teleporter is on the same wire; return to a circuit with only two pads |
Wires may be invisible in the usual view. If they only disappeared because you switched items, equip the wrench again to inspect them. Use Wire Cutters to remove unwanted wire, taking care not to cut the circuit you want to keep.
After you can make the short round trip, extend the route to your destination and test both directions again after adding wire. First prepare a safe platform at the destination and a position where you can reach the lever. If it still does not work, return to the last working two-pad setup instead of adding a third pad or automatic activation.
Sources and references
Questions and contributions
Share questions, corrections or play reports. Only approved posts for this article and language appear here.
Submit for review
Do not include personal details, passwords or private information about others. Text only. Publication and replies are not guaranteed.