Unlock and construct

Tier 8 Particle Enrichment unlocks the accelerator, Copper Powder, Pressure Conversion Cubes and Nuclear Pasta. One accelerator costs 10 Turbo Motors, 10 Supercomputers, 25 Fused Modular Frames, 50 Cooling Systems and 500 Quickwire.

Construction materials do not replace production ingredients. For Cooling Systems, see the Blender input guide.

Powder is not an ingot

One standard batch consumes 200 Copper Powder and one Pressure Conversion Cube for one Pasta. At 100%, the 120-second cycle gives the per-minute requirements above. Remember the complete batch requirements when starting.

One Constructor turns 300 Copper Ingots/min into 50 Powder/min. Sustaining one accelerator therefore needs two powder Constructors and 600 Ingots/min, plus a separate cube supply.

Check each branch as well as shared belts. Only 50 Powder/min limits long-term Pasta output to 0.25/min by material balance. Fix that bottleneck before adding accelerators.

Plan beyond the lowest reading

Standard Pasta consumes 500–1500MW at 100%. Do not budget only 500MW: combine the upper value with the existing factory load. Copper processing and cube production are additional.

  1. Confirm the Pasta recipe and 100% setting.
  2. Prepare inputs and output space; inspect the connected grid’s power graph.
  3. Start one machine and observe supply and demand through its cycle.
  4. Before expanding, include the possibility of simultaneous high demand.

Two machines have a combined maximum of 3000MW. That is a planning bound, not a claim that they constantly consume it. Batteries also need sufficient stored energy and recharge; they cannot make a permanent deficit sustainable.

No start or interrupted production

Check for Powder rather than Ingots, a cube, and enough material for a complete batch. For interruptions, also inspect the power grid and output destination. Standard Pasta has no fluid byproduct; it is not a waste-processing recipe.

Accelerator power varies by recipe. Do not assign this 500–1500MW range to diamonds or every other product. Quantum Encoder residue handling has different inputs and objectives.

Scope: PC stable 1.2, standard recipe, 100%, no amplification or mods. These balances and upper values are calculations from sources, not a live continuous-operation test.

Sources and references

Questions and contributions

Submissions are currently paused. You cannot enter or send a post until reception resumes.

Posting rules and data storage