Scope: PC full release 1.2 series, standard settings, no mods. A Drone travels back and forth between a Home Port and a destination. If it does not fly, check the ports’ power and destination, the destination’s receiving slots, compatible fuel, and initial refueling in that order.

Set a destination from the Home Port

Build two Drone Ports and connect them to power. Create one Drone at the port you will use as the home port, then set the other port as its destination from the port interface. A Drone travels between these two locations; it cannot make a multi-stop route such as A→B→C.

Each port has separate slots for outgoing and incoming items. The Drone takes cargo loaded into the Home Port’s input and carries it to the receiving slots at the destination. If items from the previous trip remain in the destination’s receiving slots and cannot be unloaded, the Drone cannot depart from that destination for its next trip. Connect the output to the receiving slots and check that the destination’s storage has space too.

Put compatible fuel in the fuel input

The Drone Port’s fuel input is separate from its cargo input. It accepts seven fuel types: Packaged Fuel, Packaged Turbofuel, Batteries, Packaged Rocket Fuel, Packaged Ionized Fuel, Uranium Fuel Rods, and Plutonium Fuel Rods. Unpackaged liquids and solid fuels not on this list cannot be used. The port can store up to one stack of fuel.

A Drone takes fuel from the port it is departing from at takeoff. If fuel is available only at the destination, provide fuel at the Home Port for the first trip to get there. If you also stock fuel at the destination, a Drone can refuel there when departing on the return trip. The amount required depends on the route, so adjust stock using the port interface’s “Fuel/min” and round-trip time.

Check in this order if the Drone does not depart

  1. Check that the Home Port has power and that a Drone has been created.
  2. In the Home Port interface, check that the destination is a different existing Drone Port.
  3. Check that fuel for the first flight is in the departure port’s fuel input. Choose from the seven fuel types listed above.
  4. Check that the destination port has room in its receiving slots and can unload the incoming cargo.
  5. Make sure you have not confused the fuel input and cargo input; check cargo inputs/outputs and the belts connected to them.
  6. Once round trips begin, adjust supply using the Home Port’s fuel type, consumption per minute, and round-trip time.
SymptomWhere to check
The Drone does not departHome Port power, whether the Drone was created, destination setting, initial fuel
It arrives and stays at the destinationSpace in receiving slots and whether the unloading belt is blocked
Fuel is loaded but the Drone does not refuelWhether it is a compatible fuel and connected to the fuel-only input
Fuel runs low during round tripsFuel/min and round-trip time in the port interface; fuel at both departure ports
You want one port to serve multiple destinationsOne Drone only travels between two locations; make a separate route for each destination

This guide is based on cross-checking the text of the Satisfactory Japanese Wiki articles “Buildings/Transport” and “Automation/Automated Vehicle Transport.” No flight tests were performed in-game. It does not provide fixed fuel quantities or flight times, or a multi-destination route setup.

Sources and references

Questions and contributions

Share questions, corrections or play reports. Only approved posts for this article and language appear here.

Submit for review

Do not include personal details, passwords or private information about others. Text only. Publication and replies are not guaranteed.