This covers the PC 1.6 base game without DLC or mods. The procedure was checked against sources, not tested in game. It concerns the constructed Firefoam popper, not portable equipment or turrets.

Prepare research and construction materials

RequirementFor one popperWhere to check
ResearchFirefoamCompleted research projects
Steel75Stock available for construction
Component1Keep separate from other facilities' needs
Construction skillAt least 5Assigned builder
Footprint1×1 tileWarehouse or other area to protect

If research is incomplete, start with checking the project and researcher. Place it from Misc in the building menu and have a capable builder finish it.

Separate detection range from foam coverage

Automatic activation is triggered by fire within a radius of 3 tiles. Once triggered, it sprays foam within a 10-tile radius after about 2.5 seconds of warning. This timing is an estimate at normal speed. It does not mean a fire 10 tiles away will automatically trigger it.

Walls and other impassable objects block foam spread. Even if foam extinguishes a wall itself, do not assume it reaches the entire room beyond. If walls divide your warehouse, check placement in each section.

  1. Check the warehouse section to protect and the location of flammable items.
  2. Look for walls blocking the foam's path from the device into that section.
  3. Finish building the popper and confirm it is unused.
  4. During a fire, check detection range and the activation warning, and assess colonist firefighting separately.
  5. After activation, check remaining fires, colonist condition and the disappearance of the device.

Manual activation is also available. However, even a test activation consumes one popper. For fires outside the foam area or in other rooms, check ordinary firefighting assignments and the home area.

Restore the device and warehouse after use

Foam extinguishes fire and prevents ignition where it coats surfaces, but it is not permanent fireproof flooring. Rain and cleaning remove it, so do not treat a sprayed warehouse as permanently safe.

A Firefoam popper is consumed in one use. You need a new one to restore protection. Unused poppers can be uninstalled and reinstalled; that is different from reloading a used device in place.

After a fire, first check treatment settings for injured colonists, then replace the popper after cleanup. Review wall and floor materials too, using stone block production as part of preparation.

When it does not work where expected

SymptomFirst checkNext action
Cannot buildResearch, 75 steel, 1 component, Construction 5Meet construction requirements
Visible fire does not trigger it3-tile detection radiusDo not confuse it with 10-tile foam coverage
Fire remains in the next roomWalls dividing the spaceCheck firefighting and placement per section
No second activationHas it already been consumed?Install a new popper
Foam disappearedRemoval by rain or cleaningDo not regard protection as permanent
Sources and references

Questions and contributions

Share questions, corrections or play reports. Only approved posts for this article and language appear here.

Submit for review

Do not include personal details, passwords or private information about others. Text only. Publication and replies are not guaranteed.