This guide covers the PC 1.6 series base game with no DLC or mods and cross-checks the RimWorld Wiki entries Apparel and Assign. The community-edited references include “needs verification” and “waiting for additions” notices, so unverified internal calculations and an exact automatic selection interval are not used. Not tested in-game.
A new piece of apparel does not always trigger a change
An apparel policy controls what a colonist selects automatically. Even newly crafted apparel is not eligible for automatic selection if it falls outside the assigned policy. Select the colonist first, then check their equipment and the apparel policy in Assign.
| Check | What to look at | Possible next action |
|---|---|---|
| Colonist | Current policy and forced apparel | Assign the intended policy to that person |
| Apparel | Type, quality, remaining HP, and taint | Compare the policy with the item’s details |
| Storage | Apparel location, forbidden status, and path | Confirm the colonist can reach it |
| Equipment combination | Body part and layer | Check whether both items can be worn together |
This table is an editorial troubleshooting order. Fixing one item alone does not guarantee an immediate change of clothes. Compare material, quality, and equipment combinations as well as whether the apparel is new.
Distinguish worn-out apparel from tainted apparel
The mood penalty from damaged apparel is based on the single worst item. At 20–50% HP, Ratty apparel gives −3; below 20% HP, Tattered apparel gives −5. This damage penalty is not simply added once for every piece of apparel.
Tainted apparel is a separate issue. Clothing worn by a person when they died becomes tainted, sometimes marked with a T in its name. Most colonists have a mood penalty while wearing it, with exceptions such as Bloodlust. A high remaining HP value does not mean the apparel is untainted.
| Apparel condition | What to distinguish |
|---|---|
| Low HP | Check the mood effect from damage |
| High HP but tainted | Check taint and the colonist’s traits |
| Good condition but the colonist is cold | Check material, quality, and temperature suitability |
Low remaining HP by itself does not lower armor or insulation stats. Check damage, quality, and material separately to clarify why you want a replacement: to improve mood, protection, or cold-weather readiness.
Prepare spare apparel before changing the policy
- List what the colonist currently wears and why you want to replace it.
- Prepare replacement apparel and check whether it covers the needed body parts.
- Open the person’s policy in Assign and check which apparel and condition it allows.
- Compare the policy requirements with the actual stock.
- Check the post-change outfit and temperature coverage in the equipment list.
One operating example to avoid the damaged-apparel mood penalty is setting the HP minimum above 50%. A 51% minimum is an editorial example, not an optimum for every situation. Prepare spares first so stricter conditions do not leave a colonist with nothing they can wear.
If you want to restrict apparel to high quality, first check whether you have any current stock that meets the condition. If there is not enough clothing, return to your first tailoring and production settings.
Check whether forced apparel is still active
Apparel that was manually forced to be worn does not return to normal automatic selection just because you change the policy. Check the item marked forced in the equipment list and, if appropriate, use Clear forced in Assign. This removes the forced designation.
If apparel was forced for combat or cold protection, check its role before clearing it. Removing protective clothing just to improve mood may conflict with the reason it was assigned. After clearing the designation, check the actual equipment list and confirm the result of the clothing change.
Check whether body parts and layers overlap
Apparel conflicts when it uses the same layer on the same body part. For example, pants and Tribalwear both occupy the legs’ Skin layer. Pants and a Button-down shirt can be worn together because they cover different body parts, even though both use the Skin layer.
Do not assume that different apparel items always layer together, or that all items on the same layer conflict. Check each item’s details. For combinations involving a flak vest, see your first flak vest.
Check the result after changing clothes
After a colonist changes, check more than whether the old clothes were removed: review their current outfit, mood causes, and temperature protection. This guide does not give a fixed number of seconds for automatic replacement or claim that the newest item is always selected.
If apparel is not selected, check in this order: colonist policy, apparel conditions, whether it can be reached, forced designation, then body parts and layers. Checking one change at a time makes it easier to tell whether the policy or the stock needs adjustment.
Sources and references
Questions and contributions
Share questions, corrections or play reports. Only approved posts for this article and language appear here.
Submit for review
Do not include personal details, passwords or private information about others. Text only. Publication and replies are not guaranteed.