From rod to collector
PC stable 2.1.23, Space Age, normal quality, no extra mods; official definitions, not measured generation. Fulgora discovery unlocks the rod: 12 copper cable, 8 steel plates, 4 stone bricks. Collector research requires electromagnetic science and 1,000 units of automation, logistic, chemical, space and electromagnetic packs, 60 seconds each.
A collector costs 1 rod, 8 supercapacitors, 1 accumulator and 80 electrolyte. Manufacture it in an electromagnetic plant at magnetic field 99, Fulgora among standard planets. Consuming an accumulator in construction does not replace external storage.
Efficiency is not storage
Normal efficiency rises from 20% to 40%, footprint from 1×1 to 2×2, with wider protection. Factory-average power is not guaranteed to double: strikes, overlap, demand and charging matter. Internal storage rises from 500MJ to 1,000MJ, but drains rapidly; it is not long-duration accumulator storage.
Check a daytime shutdown
- Inspect protection coverage at the factory edge; do not confuse it with pole coverage.
- Confirm collector, accumulators and consumers share the intended grid.
- Watch charging during the stormy night. If it fails, check connections, capture and active load first.
- If batteries fill at night but empty by day, review storage and daytime load. More batteries cannot fix a source that never charges them.
- Recheck coverage and footprint after replacement.
For example, 10MW for 100 seconds requires 1,000MJ of usable energy. This is arithmetic, not a measured day length or tower yield; discharge capacity, other loads and reserve also matter. See power-switch separation (Japanese) for an older 2.0 base-game example, not a lightning safety guarantee, and electromagnetic manufacturing for production stops.
Sources and references
Questions and contributions
Submissions are currently paused. You cannot enter or send a post until reception resumes.