Make the door and controls
One Electrical Door costs 5 Iron Bars and 1 Mechanical Part at an Electronics Table. The table itself costs 8 Wood and 8 Copper Bars at a Copper Workbench.
| Control | Materials per item at Electronics Table | Purpose |
|---|---|---|
| Pressure Plate | 2 Copper Bars, 2 Tin Bars | Input when stepped on |
| Lever | 3 Wood, 2 Copper Bars | Manual on/off |
Two plates, one on each side, therefore cost 4 Copper Bars and 4 Tin Bars. Count the door, table and any wires separately. Electrical Drop Gate is a different item with a different recipe.
Test a two-sided entrance
- Place the door away from enemies and leave a bypass during testing.
- Put a Pressure Plate adjacent to the door on each side of the passage.
- Step on one plate and check that you can pass through.
- Repeat from the other side to confirm the return route.
- Step away and check that no other source keeps feeding the door.
Plates generate their own input; do not add constant power just for this minimal arrangement. Start with adjacent placement before extending the circuit.
Diagnose opening and closing separately
If only one direction works, check the return-side plate and connection. If the door stays open, look for a generator or active lever still supplying it. If it never opens, check adjacency, wiring and yellow powered indicators. If a distant control fails, test near the door before checking longer sections.
Switching one lever off cannot remove power arriving through another route. Inspect incoming paths individually before dismantling the whole circuit.
Convenience is not guaranteed defence
This arrangement makes passage convenient; it is not a promise that every enemy is excluded. An Explorer Proximity Sensor has its own detection conditions to check before upgrading. See the Crude Drill power check for basic supply. Scope: PC 1.3, normal settings, no mods; reference checks, not tested opening speeds or all input devices.
Sources and references
Questions and contributions
Submissions are currently paused. You cannot enter or send a post until reception resumes.